Product Summary
Voopoo PNP X Replacement Coils are push-fit mesh coils sold in packs of five, keeping any PnP X kit or pod running with fresh flavour. Four resistances cover every style: the 0.15 ohm (60 to 80W) and 0.2 ohm (40 to 60W) suit direct to lung clouds with high VG e-liquid, the 0.3 ohm (32 to 40W) fits every compatible device, and the 0.6 ohm (18 to 23W) gives a tighter mouth to lung draw with 50/50 blends. Ideal spares for Drag and Argus owners running a PnP X pod.
Voopoo PNP X Replacement Coils keep your PnP X kit or pod running with fresh flavour. They are mesh coils with a simple push-fit design, so you just pull the old coil out and push a new one in. Every pack contains five coils.
The range spans four resistances, from a 0.15 ohm coil for direct to lung clouds to a 0.6 ohm coil for a tighter mouth to lung draw. Because of this, there is an option for almost every style. Please note that PnP X coils are not cross-compatible with tanks and pods that use standard PnP coils.
Which kits and pods fit PnP X coils?
PnP X coils work across a wide range of Voopoo devices. They fit the Drag 6, Drag 5, Drag S3, Drag X3, Drag S2, Drag X2, Argus Pro 2, Argus E40 and Doric 60 Pro kits. They also fit the PnP X DTL, PnP X MTL and Argus PnP X pods. The table below therefore shows each coil and its wattage range.
| PnP X Coil Version & Wattage | |
|---|---|
| 0.15 Ohm Mesh | 60 to 80W, DTL. Not for the Argus E40, Doric 60 Pro, PnP X MTL pod or Argus PnP X pod |
| 0.2 Ohm Mesh | 40 to 60W, DTL. Not for the Argus E40, Doric 60 Pro, PnP X MTL pod or Argus PnP X pod |
| 0.3 Ohm Mesh | 32 to 40W. Fits every compatible kit and pod |
| 0.6 Ohm Mesh | 18 to 23W, MTL. Fits every device except the Doric 60 Pro |
Which resistance should you choose?
For direct to lung vaping with big vapour, choose the 0.15 ohm coil at 60 to 80W or the 0.2 ohm coil at 40 to 60W. Both pair best with high VG shortfill e-liquid. However, neither fits the Argus E40, Doric 60 Pro, PnP X MTL pod or Argus PnP X pod.
Meanwhile, the 0.3 ohm coil runs at 32 to 40W and fits every compatible device. For a tighter mouth to lung draw, the 0.6 ohm coil runs at 18 to 23W and suits 50% VG 50/50 e-liquid. That said, it does not fit the Doric 60 Pro.
Fitting and care
Fitting a PnP X coil takes only seconds. First, pull the old coil out of the pod, then push the new one firmly into place. Because a fresh coil needs to soak, add e-liquid and wait a few minutes before your first puff. This short prime step protects the mesh and keeps the flavour clean. Therefore, you should replace a coil once the taste turns muted or burnt.
What's in the pack
- 5 x Voopoo PNP X replacement coils, in your chosen resistance
