What device are the GTR coils for?

They are built for the Vaporesso FORZ tank and the FORZ TX80 kit that uses it. Both resistances share the same fitting, so they seat and fire in the same way. If your device runs the GTR coil, you simply pick the resistance that gives the draw and wattage you want.

What is the difference between the two resistances?

The 0.15 ohm coil handles 60 to 80W and puts out the warmest, widest clouds in the pair, while the 0.4 ohm runs 40 to 60W for a steadier vapour at lower power. Both are direct-to-lung mesh builds; choose by whether you want bigger clouds or a more measured draw.

Which e-liquid should I use?

High-VG e-liquid of 70% VG or above suits both coils. That thicker liquid feeds the organic cotton wick cleanly at sub-ohm power, whereas a thinner high-PG or 50/50 liquid can wick too quickly on these resistances and leave you with a dry or harsh draw.

How do I break in a new GTR coil?

Prime it first. Put a few drops of e-liquid onto the exposed cotton, fill the tank, then let it stand a couple of minutes so the wick soaks through. Starting at the lower end of the wattage range while the coil settles helps it last and keeps the first draws from tasting burnt.

Vaporesso GTR Replacement Coils

Checking prices...

£12.99

Brand

Vaporesso

Made In

China

Pack Size

3 Pack

Coil Type

Mesh

Coil Resistance

0.14Ω, 0.4Ω

Choose Flavour

Please select a flavour to continue

Product Summary

Designed for the Vaporesso FORZ tank and FORZ TX80 vape kit, the Vaporesso GTR replacement coils come in a pack of 3 with two sub-ohm mesh options. The 0.4 Ohm coil runs best at 40-60W for solid vapour, while the 0.15 Ohm version handles 60-80W for maximum cloud production. Both use organic cotton wicks that extend coil life and pull richer flavour from your e-liquid. Pair them with liquids of 70% VG or more to suit their direct to lung output. An easy answer for FORZ owners wondering which coil to restock.

Vaporesso GTR replacement coils are sub-ohm mesh coils for direct-to-lung vaping, sold three to a pack. Each one wicks with organic cotton and slots straight into a compatible tank, ready to fire once it has primed. Two resistances are offered, one geared to bigger clouds and one to a leaner output, so you can restock whichever matches how you vape.

Which tank and kit do these fit?

The GTR coils are made for the Vaporesso FORZ sub-ohm tank and the FORZ TX80 kit that carries it. Both resistances share the same threading and seat the same way, so if your device runs the GTR coil the only choice to make is the resistance and the wattage that goes with it.

Coil options and the draw each suits

Both coils are mesh builds wrapped with an organic cotton wick, which draws liquid steadily and pulls fuller flavour as the coil beds in:

0.15 ohm: handles 60 to 80W for the widest, warmest clouds in the range.
0.4 ohm: runs 40 to 60W for a steadier vapour output at lower power.

Both suit high-VG e-liquid of 70% VG or more, which feeds the mesh cleanly at these sub-ohm resistances.

Fitting and care

Fit a fresh coil, then prime it before vaping: drip a little e-liquid onto the visible cotton, fill the tank and leave it standing a couple of minutes so the wick takes up liquid fully. Skipping that soak is what causes a dry, burnt first draw. Ease the wattage up from the lower end of the coil's range, and swap in the next coil once the flavour fades or turns harsh.