Product Summary
The OXVA Xlim 4 Pod Kit is a slim refillable MTL and RDTL kit with a 1600mAh battery, 55-minute charging and a 5-30W range. It fires on inhale or by button, and two presses switch between three power modes. Its 2ml, 0.8 Ohm Unitech 3.0 pod has a built-in mesh coil, and a side slider adjusts the airflow. A USB-C cable comes in the box, and the kit runs on 50% VG e-liquid. In ten finishes, it is an easy all-day pick for newcomers and regular vapers.
The OXVA Xlim 4 Pod Kit is a slim, straightforward refillable kit for MTL and RDTL vaping. Despite its light build, it packs a 1600mAh battery that lasts most vapers a full day. On top of that, 2A fast charging refills it in about 55 minutes. As a result, it suits a first-time vaper just as well as a regular one.
The box includes a 0.8 Ohm Xlim Unitech 3.0 pod for a tight MTL draw. Its mesh coil is built into the pod. So you just fill it with a 50% VG e-liquid and inhale to vape, or press the button instead. Meanwhile, three power modes and an airflow slider let you tune every puff. A USB-C cable also comes in the box.
At a Glance
- 1600mAh internal battery that sees most vapers through a full day
- 55-minute recharge at 2A through the USB-C port
- 5-30W output range
- Inhale or button activation
- Three power modes: Low, Medium and High
- Side airflow slider to loosen or tighten each puff
- 2ml refillable pod, with a 0.8 Ohm Xlim Unitech 3.0 pod included
- Runs on 50% VG e-liquid in Xlim Unitech 3.0, Xlim V3 or Xlim EZ pods
Who is the OXVA Xlim 4 Pod Kit for?
Choose it if:
- You want a slim mouth to lung pod kit that is quick to set up
- You like to switch between a tight MTL draw and a looser RDTL one
- You need a full day from one charge, then a recharge that takes under an hour
- You want plenty of looks to pick from, since the kit comes in ten finishes
Look elsewhere if:
- You chase big clouds: for full direct to lung vaping, a sub-ohm pod kit suits you better
- You want a screen: the OXVA Xlim Pro 3 Pod Kit adds a colour display
Ten Finishes in a Slim, Light Body
The Xlim 4 keeps the slim, pen-style shape of the Xlim range. It measures 118 by 26 by 14mm and weighs 76g, so it carries comfortably in a pocket. Meanwhile, a light ring around the round button changes colour to show the battery level.
On top of that, the ten finishes fall into four styles:
- Black Carbon for a textured carbon-fibre look
- Silken Black Leather, Silken Brown Leather, Silken Blue Leather and Silken Champagne for a leather-look finish
- Nacre White, Nacre Pink and Nacre Purple for a pearly, marbled shimmer
- Aurora Petal Pink and Aurora Petal Purple for bright, swirling colour
All-Day Battery, Three Power Modes
Inside sits a 1600mAh battery, which keeps most vapers going for a full day. Once it runs low, the supplied USB-C cable and 2A fast charging refill it in about 55 minutes. As a result, you are rarely left waiting.
Firing is just as simple, because the kit works by inhale or by button. When you fit a pod, it also sets the recommended power level for you. Then, two presses of the button cycle through three modes. Low saves battery, Medium gives a balanced vape and High boosts flavour. Overall, the output covers 5W to 30W.
Unitech 3.0 Pods With Mesh Coils
The kit comes with a 0.8 Ohm Xlim Unitech 3.0 pod for a tight MTL draw. It holds 2ml, and its built-in mesh coil heats e-liquid quickly for better flavour. Like other Xlim pods, it has a top-fill design. To fill it, pull out the silicone seal on the side of the pod, then reseal it. Once filled, give the coil five minutes to soak before your first puff.
Beyond that, the Xlim 4 also takes Xlim Unitech 3.0, Xlim V3 and Xlim EZ pods. The 0.8 and 1.2 Ohm pods suit MTL, while the 0.4 and 0.6 Ohm pods give an RDTL draw. Each pod usually lasts around a week, and the table below shows the wattage window for every resistance.
We do not currently stock Unitech 3.0 spares. However, the OXVA Xlim V3 top fill replacement pods we sell fit the Xlim 4 too.
| Xlim Pod Resistance & Wattage | |
|---|---|
| 0.8 Ohm Xlim Unitech 3.0 Pod (Included) | Top Fill, Mesh, MTL, 12-18W |
| 1.2 Ohm Unitech 3.0 / Xlim V3 / Xlim EZ (Sold Separately) | Mesh, MTL, 10-12W |
| 0.6 Ohm Unitech 3.0 / Xlim V3 / Xlim EZ (Sold Separately) | Mesh, RDTL, 20-25W |
| 0.4 Ohm Unitech 3.0 / Xlim V3 / Xlim EZ (Sold Separately) | Mesh, RDTL, 26-30W |
Slide the Airflow to Suit Your Draw
You can also shape how each puff feels on the Xlim 4. A slider on the side of the device sets the airflow. So a quick nudge makes every inhale looser or tighter.
For a tight MTL draw, keep the slider closed and stay with the 0.8 Ohm pod. For an airier RDTL draw, instead open the slider and fit a 0.4 or 0.6 Ohm pod. As a result, one slim kit covers two vaping styles.
What's in the Box
- 1 x OXVA Xlim 4 device
- 1 x 0.8 Ohm OXVA Xlim Unitech 3.0 pod (2ml)
- 1 x USB-C cable
- 1 x User manual






















