Which pods does the OXVA Xlim Pro 3 use?

It uses OXVA Xlim pods, and 0.6 Ohm and 0.8 Ohm pods come included. The kit also works with the wider Xlim pod range, from 0.4 Ohm up to 1.2 Ohm, so you can switch between MTL and RDTL vaping. All the pods fill from the top and use a mesh coil. Pair them with 50/50 e-liquid for the best results.

How long does the battery last and how do I charge it?

The built-in 1500mAh battery lasts most vapers a full day between charges. When it runs low, the HD screen shows the level, and the included USB-C cable recharges the kit in under an hour. Because the battery is built in, there is no need to buy or replace separate cells. Charge times can vary a little with the cable and plug you use.

What is the difference between MTL and RDTL vaping?

MTL, or mouth to lung, gives a tight draw that feels like a cigarette and makes less vapour. RDTL, or restricted direct to lung, is a looser, airier draw with more vapour. The Xlim Pro 3 covers both, so you choose the style with the pod and airflow. Higher-resistance pods suit MTL, while lower-resistance pods suit RDTL.

What e-liquid and nicotine strength should I use?

The Xlim Pro 3 is designed for 50/50 e-liquid, which wicks well through the mesh pods. Nicotine salts suit the tighter MTL draw, while freebase liquids work well too. As a rough guide, 5 to 10 cigarettes a day pairs with around 10mg to 12mg, and heavier smokers often start at 20mg salt. Lighter smokers can drop to 6mg or below.

Is this a disposable vape?

No. It is a rechargeable, refillable pod kit and a longer-lasting alternative to disposables. You refill the 2ml pods with your own e-liquid and recharge the device over USB-C. As a result, it costs less per week than single-use vapes while staying fully UK TPD compliant. It is sold to over-18s only.

OXVA Xlim Pro 3 Pod Kit | 1500mAh Refillable MTL Kit

Product Summary

The OXVA Xlim Pro 3 is a slim refillable pod kit with a 1500mAh battery, up to 30W output and a 1.05-inch HD colour screen for at-a-glance control. It charges over USB-C in under an hour and fires when you inhale, while smart mode reads the pod and sets the power. Two top-filling Xlim mesh pods come included, covering both MTL and RDTL vaping, and adjustable airflow tunes the draw. Pair it with 50/50 e-liquid. Ideal as an easy all-day refillable for new and experienced vapers alike, in fifteen colours.

The OXVA Xlim Pro 3 is a slim refillable pod kit that suits both new and experienced vapers. It packs a built-in 1500mAh battery, so it lasts most people a full day. Because it charges over USB-C in under an hour, you are rarely left waiting. On top of that, a 1.05-inch HD colour screen shows your battery, wattage and puff count at a glance.

The kit is built for MTL and RDTL vaping, and it works with the full range of Xlim pods. Two pods come included, so you can start right away. Just add your own e-liquid, then inhale to fire. Meanwhile, an adjustable airflow slider lets you tune the draw, while the output reaches up to 30W.

At a Glance

1500mAh built-in battery for all-day vaping
Full USB-C charge in under 1 hour
5W to 30W output range
Inhale-activated firing, plus a manual wattage button
Smart mode reads the pod and sets the power
1.05-inch HD colour screen
Adjustable airflow for MTL and RDTL draws
2ml top-filling refillable Xlim pods

Who is the OXVA Xlim Pro 3 for?

Choose it if:

You want a simple refillable pod kit with a long-lasting battery for daily carry
You are moving on from disposables and want an easy mouth to lung draw
You like to fine-tune the inhale with adjustable airflow and a choice of pods

Look elsewhere if:

You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
You never want to refill or recharge: this kit needs your own e-liquid

A Slim Body in Fifteen Finishes

The Xlim Pro 3 keeps a slim, pen-style shape that sits easily in the hand. It measures 117 by 26 by 15mm and weighs just 77g. So it slips into a pocket or bag without fuss. On top of that, the range spans leather-look, carbon, ceramic and silk finishes. It also refines the earlier OXVA Xlim Pro 2 and Xlim Pro. In total, you can pick from fifteen colours:

Black Carbon, Pro Carbon and Forged Black for a bold, textured look
Black Leather, Brown Leather and Retro Brown for a warm leather-effect finish
Ceramic Black and Ceramic White for a smooth, clean style
Forged Blue, Sky Blue, Race Red, Pink Silk, Purple Silk, Lavendar Purple and Titanium Silk for brighter accents

A Full Day of Power

The 1500mAh battery is generous for such a slim device. As a result, it comfortably covers a full day for most vapers. When it runs low, the supplied USB-C cable recharges it in under an hour. Meanwhile, the HD colour screen keeps you informed, showing battery level, wattage and puff count.

Firing is simple, because you just inhale to vape. First insert a pod, and smart mode reads it and sets a suitable wattage. Then, if you prefer, the button lets you set your own level within the 5W to 30W range.

Xlim Pods and Flavour

The Xlim Pro 3 comes with two top-filling Xlim pods, in 0.6 Ohm and 0.8 Ohm. Because the pods fill from the top, you can refill without removing them from the device. Each pod uses a built-in mesh coil, so it heats e-liquid quickly for cleaner flavour. The 0.8 Ohm pod suits MTL or RDTL vaping, while the 0.6 Ohm pod leans towards RDTL.

On top of that, the kit works with the wider Xlim pod range, including 0.4 Ohm and 1.2 Ohm options. So you can move from a tight MTL draw to a looser RDTL one by swapping the pod. When you need spares, the OXVA Xlim V3 Top Fill Replacement Pods drop straight in. We recommend 50/50 e-liquid, and each pod runs best at its own wattage, shown in the table below.

Xlim Pod Version & Resistance
0.4 Ohm Xlim Pod	Top Filling, Mesh, RDTL, 26-30W
0.6 Ohm Xlim Pod (Included)	Top Filling, Mesh, RDTL, 20-25W
0.8 Ohm Xlim Pod (Included)	Top Filling, Mesh, MTL & RDTL, 12-18W
1.2 Ohm Xlim Pod	Top Filling, Mesh, MTL, 10-12W

Adjustable Airflow and Two Draw Styles

The Xlim Pro 3 gives you real control over the inhale. First, an airflow slider on the device lets you open or close the intake. So you can set a snug MTL draw or a looser RDTL one in seconds. As a result, one small kit covers two very different vaping styles.

Higher-resistance pods, like the 1.2 Ohm, suit a tight cigarette-style MTL draw. Lower-resistance pods, such as the 0.4 Ohm, instead give an airier RDTL hit with more vapour. Because you can mix airflow and pod choice, it is easy to dial in your ideal setup.