Product Summary
The Voopoo Vinci E120 is a refillable sub ohm pod kit with a large built-in 4500mAh battery, a wide 5W to 120W output and adjustable airflow. It charges over USB-C and uses a 2ml side-filling PNP X pod with replaceable mesh coils. A 0.15 Ohm and a 0.3 Ohm coil come included, both tuned for direct to lung clouds. Ideal for vapers who want big clouds and all-day battery from a simple, refillable pod device, in seven colours.
The Voopoo Vinci E120 is a refillable sub ohm pod kit built for big clouds and all-day power. It packs a large built-in 4500mAh battery and a wide 5W to 120W output range. So it suits direct to lung vapers who want serious performance from a pocketable pod. You simply refill the pod, choose your wattage and vape.
The kit runs on a 2ml refillable PNP X pod and takes replaceable PNP X mesh coils. Two coils come included, a 0.15 Ohm and a 0.3 Ohm, both tuned for cloud-chasing DTL vaping. A USB-C cable is also in the box, so you can charge it straight away. On top of that, the GENE TT 2.0 chip sets the right output for each coil automatically.
At a Glance
- Large built-in 4500mAh battery for all-day sub ohm vaping
- 5W to 120W variable output
- GENE TT 2.0 smart chipset with automatic power detection
- DTL (direct to lung) vaping
- Large 2.4 inch TFT colour display
- Adjustable airflow slider
- 2ml side-filling refillable PNP X pod
- PNP X 0.15 and 0.3 Ohm mesh coils included, plus USB-C charging
Who is the Vinci E120 for?
Choose it if:
- You want a sub-ohm pod kit with a big battery for daily DTL vaping
- You are stepping up from a starter kit and want a refillable pod kit with more power
- You like to fine-tune the draw with adjustable airflow
Look elsewhere if:
- You prefer a tight cigarette-like draw: a mouth to lung pod kit suits that better
- You want a more compact everyday device: the Voopoo Vinci 3 is a smaller option
A Bold Sub Ohm Pod in the Hand
The Vinci E120 keeps a chunky box shape with rounded edges and a glossy finish. It measures 118 by 48 by 25mm and weighs 160g. So it stays pocketable while still holding a big battery. A large 2.4 inch TFT display also gives the front a modern, screen-led look.
On top of that, the range spans seven finishes. These run from clean metallics to bolder accents. In short, there is a colour for most tastes:
- Champagne Golden, Glow Silver and Grey Metal for a clean, metallic look
- Snow Blue for a cooler, fresher accent
- Star Purple and Rose Red for a bolder finish
- Spray Black for a sleek, understated finish
A Full Day of 120W Power
The built-in 4500mAh battery is large for a pod kit. As a result, it comfortably powers a full day of sub ohm vaping for most people. When it runs low, you recharge it over USB-C with the included cable.
Control stays simple too. First, the GENE TT 2.0 chip detects your coil and sets a suitable wattage. Then you can adjust the power yourself, anywhere across the 5W to 120W range. Meanwhile, the large 2.4 inch TFT display shows your wattage, battery level and coil resistance clearly.
Refillable PNP X Pods and Coils
The Vinci E120 uses a 2ml refillable PNP X pod that fills from the side. First, lift the stopper, then top it up and push it back in. Unlike built-in coil pods, this pod takes replaceable PNP X mesh coils. So you swap just the coil when it fades.
Two coils come included, a 0.15 Ohm and a 0.3 Ohm, both mesh for even heating and strong flavour. Because both are low-resistance DTL coils, pair them with a 70% VG e-liquid for the biggest clouds. The pod also fits a wider range of Voopoo PNP X coils, and each resistance runs best at its own wattage, shown in the table below.
| Vinci E120 Coil Version & Resistance | |
|---|---|
| 0.15 Ohm PNP X Coil (Included) | Mesh, DTL, Big Clouds |
| 0.3 Ohm PNP X Coil (Included) | Mesh, DTL, Flavour |
Adjustable Airflow for DTL Clouds
The Vinci E120 gives you real control over the draw. First, slide the airflow control to tighten or open the inhale. So you can set an airy DTL draw for maximum clouds, or close it down for a warmer, more restricted hit.
Because the airflow is adjustable, you can match the draw to your coil and e-liquid. For example, open it fully with the 0.15 Ohm coil for big clouds. Then tighten it slightly with the 0.3 Ohm coil for a denser, more flavour-focused vape.
What's in the Box
- 1 x Voopoo Vinci E120 device
- 1 x Vinci PNP X DTL pod (2ml)
- 1 x PNP X 0.15 Ohm mesh coil
- 1 x PNP X 0.3 Ohm mesh coil
- 1 x USB-C charging cable
- 1 x User manual
- 1 x PNP X compatibility guide
