Which pods does the Argus G3 use?

It uses Voopoo Argus Pod V2 pods, and it also fits Argus Snap V2 pods. A 0.4 Ohm and a 0.7 Ohm pod come included, so you can vape straight away. The 0.4 Ohm pod suits a looser RDTL draw, while the 0.7 Ohm and 1.0 Ohm pods suit MTL vaping. Each pod holds 2ml and fills from the top.

How long does the battery last and how do I charge it?

The built-in 1500mAh battery lasts most vapers a full day between charges. When it runs low, the colour screen shows the level at a glance. You then recharge it over USB-C using the cable in the box. So you can top up at home or on the go.

What e-liquid should I use with it?

Voopoo recommend pairing the Argus G3 with 50% VG e-liquid, which covers most balanced nicotine salts and freebase blends. These thinner liquids wick well through the mesh coils. As a rough guide, lighter smokers often start around 10mg salts, while heavier smokers may prefer 20mg. Higher-VG liquids are too thick for these small pods.

What is the difference between MTL and RDTL on this kit?

MTL, or mouth to lung, gives a tight cigarette-like draw with less vapour. The 0.7 Ohm and 1.0 Ohm pods suit this style. RDTL, or restricted direct to lung, gives a looser, warmer draw, and the 0.4 Ohm pod handles it. Because the airflow adjusts, you can fine-tune either style on the device.

Is this a disposable vape?

No. The Argus G3 is a rechargeable, refillable pod kit and a longer-lasting alternative to disposables. You refill the 2ml pods with your own e-liquid and recharge the battery over USB-C. As a result, it costs less per week than single-use vapes and creates less waste.

Voopoo Argus G3 Pod Kit | 1500mAh MTL & RDTL Pod Kit

Product Summary

The Voopoo Argus G3 is a compact refillable pod kit with a 1500mAh battery, 5W to 30W output and a bright 0.96 inch colour screen. It charges over USB-C with the included cable and fires automatically when you inhale, so there are no buttons to learn. The two included Argus V2 pods cover both MTL and RDTL vaping, while adjustable airflow tunes the draw. Pair them with 50% VG e-liquid. Ideal as an easy all-day refillable for anyone leaving disposables behind, in nine colours.

The Voopoo Argus G3 is a simple refillable pod kit that suits both new and experienced vapers. It packs a large 1500mAh built-in battery, so most people get a full day from a single charge. On top of that, a smart chip reads each pod and sets the ideal wattage for you. As a result, set-up stays quick and fuss-free.

In the box you get two Argus Pod V2 pods, in 0.4 Ohm and 0.7 Ohm. Because of this pairing, you can vape in a looser RDTL or a tighter MTL style from day one. Meanwhile, a 0.96 inch colour screen keeps you posted on battery and settings. A USB-C cable is also included, so you can charge it straight away.

At a Glance

1500mAh built-in battery that lasts most vapers a full day
5W to 30W variable output range
MTL and RDTL vaping from Argus V2 pods
Inhale-activated firing, so there is no fire button
Smart Mode plus multiple manual modes
0.96 inch TFT colour screen
2ml top-filling refillable pods with built-in mesh coils
Adjustable airflow slider and USB-C charging

Who is the Argus G3 for?

Choose it if:

You want a simple refillable pod kit with an all-day battery for daily carry
You are leaving disposables behind and want an easy mouth to lung draw
You like to tune the inhale with adjustable airflow and switchable modes

Look elsewhere if:

You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
You never want to refill or recharge: this kit needs your own e-liquid and a charge

A Slim Body in Nine Finishes

The Argus G3 keeps a slim, pocket-friendly shape that sits easily in the hand. It measures 118 by 26 by 16mm and weighs just 61g. So it stays light in a pocket or bag all day. A 0.96 inch colour screen sits on the front, so your battery level and mode stay in view. It also joins the wider Voopoo Argus pod kit range.

On top of that, the range spans nine finishes. Some shades stay bright and glossy, while others keep a clean, understated look. In total, you can pick from these colours:

Midnight Black, Space Gray and Pearl White for a classic everyday look
Diamond White and Diamond Pink for a brighter, glossy finish
Snow Blue, Aurora Blue and Aurora Purple for cooler tones
Moss Green for a natural, earthy accent

All-Day 1500mAh Power

The 1500mAh battery is generous for such a slim kit. As a result, it comfortably covers a full day for most vapers. When it runs low, the colour screen shows the level at a glance. A USB-C cable then recharges it, and that cable comes in the box.

Because there is no fire button, you simply inhale to vape. First insert a pod, and Smart Mode reads it automatically. Then it sets the ideal wattage within the 5W to 30W range. For more control, you can also switch modes yourself.

Argus V2 Pods and Mesh Coils

First, top-fill the 2ml Argus pod, then click it into place and start vaping. Because the pods fill from the top, you refill without removing the pod. Each pod uses a built-in mesh coil, so it heats e-liquid quickly for cleaner flavour. When a coil fades, you simply swap the whole pod.

The kit works with Argus and Argus Snap V2 pods in three resistances. So you can set a looser RDTL draw or a tighter MTL one, depending on the pod. We recommend pairing all of them with 50% VG e-liquid. Each pod runs best at its own wattage, shown in the table below.

Argus Pod Version & Resistance
2ml, 0.4 Ohm (Included)	Top Filling, Mesh, RDTL, 10-14W
2ml, 0.7 Ohm (Included)	Top Filling, Mesh, MTL, 14-18W
2ml, 1.0 Ohm (Sold Separately)	Top Filling, Mesh, MTL, 18-30W

Adjustable Airflow for Every Draw

The Argus G3 gives you real control over the inhale. First, the airflow slider lets you tighten or open the draw. So you can set a snug MTL draw for more flavour. Instead, open it up for a looser, airier RDTL hit.

Because the airflow adjusts on the device, you change it without any tools. As a result, one small kit suits several vaping styles. Meanwhile, swapping the pod resistance fine-tunes the draw even further.