Product Summary
OXVA VPrime Dual Mesh Replacement Pods are the side-filling 2ml pods for the OXVA VPrime 2, each with a built-in dual mesh coil. Choose from 0.4, 0.6 and 0.8 ohm versions, with two pods in every pack. On the VPrime 2, they unlock Dual Mesh Mode for more vapour and boosted flavour, or Single Mesh Mode for a discreet vape and longer battery life. They suit VPrime 2 owners who want spare pods with both power modes on tap.
OXVA VPrime Dual Mesh Replacement Pods are the side-filling pods that come with the OXVA VPrime 2 pod kit. Each pod holds 2ml of e-liquid and has a built-in dual mesh coil. As a result, a fresh pod quickly brings back full flavour.
You can choose from 0.4, 0.6 and 0.8 ohm versions, and each pack holds two pods. On top of that, these pods unlock two power modes on the VPrime 2. Dual Mesh Mode gives more vapour and boosted flavour. Meanwhile, Single Mesh Mode keeps the vape discreet and extends battery life.
Which kits do the OXVA VPrime Dual Mesh Replacement Pods fit?
These pods fit the OXVA VPrime 2 Pod Kit. In fact, the kit ships with the 0.4 and 0.6 ohm versions in the box. To use one, simply insert the pod, fill it through the side and inhale.
The VPrime 2 also accepts the standard OXVA VPrime Replacement Pods. However, Dual Mesh Mode and Single Mesh Mode only work with these dual mesh pods. The table below sets out each version.
| VPrime Dual Mesh Pod Guide | |
|---|---|
| 0.4 Ohm Dual Mesh (2 Pack) | 2ml Side Fill, Single Mode 10 to 40W, Dual Mode 40 to 60W |
| 0.6 Ohm Dual Mesh (2 Pack) | 2ml Side Fill, Single Mode 10 to 35W, Dual Mode 35 to 50W |
| 0.8 Ohm Dual Mesh (2 Pack) | 2ml Side Fill, Dual Mesh Coil |
Which version should you choose?
The 0.4 ohm pod runs at 10 to 40W in Single Mesh Mode. In Dual Mesh Mode, it climbs to 40 to 60W. Because it is the lowest resistance here, it suits direct to lung vaping with a 70% VG e-liquid.
Meanwhile, the 0.6 ohm pod runs at 10 to 35W in Single Mesh Mode. Switch to Dual Mesh Mode and it runs at 35 to 50W. The 0.8 ohm pod is the highest resistance in the range. For a tighter mouth to lung draw, pick a higher resistance and pair it with a 50% VG e-liquid.
Fitting and care
First, remove any stickers from a new pod and fill it with e-liquid through the side. Then wait 10 minutes so the e-liquid can soak into the coil before you start vaping.
Because the coil is built in, you replace the whole pod once the coil burns out. In short, there is no separate coil to change.
What's in the pack
- 2 x OXVA VPrime Dual Mesh Replacement Pods

















