Product Summary
Vaporesso Xros Corex 2.0 Replacement Pods (formerly known as Xros pods) fit the Xros series, including the Xros 3, Xros 3 Mini, Xros Pro and Xros Cube; the 0.4 Ohm version works only with the Xros Pro, Xros 4, Xros 4 Mini and Xros 4 Nano. Each refillable pod holds 2ml, fills from the top under the mouthpiece and uses a built-in Corex mesh coil, so you replace pod and coil together. Resistances run from 0.4 to 1.2 Ohm, covering MTL, RDTL and DTL styles, and they come in a pack of four. Essential spares for any Xros kit owner.
These Vaporesso Xros Corex 2.0 pods, once sold as Xros pods, are refillable replacement pods for the Xros series of kits. Each pod holds 2ml of e-liquid, fills from the top under the mouthpiece and has a built-in Corex mesh coil, so the pod and coil are replaced together. They come four to a pack, across five coil resistances to suit different draws.
Which Xros kits do these pods fit?
The Corex 2.0 pods work across the Xros range, including the Xros 3, Xros 3 Mini, Xros Pro and Xros Cube. The one exception is the 0.4 ohm pod, which fits just the Xros Pro, Xros 4, Xros 4 Mini and Xros 4 Nano. The full compatibility list is in the table below.
| Vaporesso Xros Corex Pods Guide Table | |
|---|---|
| Xros | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros Mini | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros 2 | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros 3 | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros 3 Mini | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros 3 Nano | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros Pro | Compatible Pods = 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = DTL, RDTL, MTL - Recommended E-Liquid = 50% VG, high VG, or high PG (based on pod) |
| Xros Cube | Compatible Pods = 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = MTL, RDTL - Recommended E-Liquid = 50% VG or high PG |
| Xros 4 | Compatible Pods = 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = DTL, RDTL, MTL - Recommended E-Liquid = 50% VG, high VG, or high PG (based on pod) |
| Xros 4 Mini | Compatible Pods = 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = DTL, RDTL, MTL - Recommended E-Liquid = 50% VG, high VG, or high PG (based on pod) |
| Xros 4 Nano | Compatible Pods = 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω - Inhale Type = DTL, RDTL, MTL - Recommended E-Liquid = 50% VG, high VG, or high PG (based on pod) |
Which resistance should you choose?
The pods come in five resistances, covering mouth-to-lung, restricted direct-to-lung and direct-to-lung styles. As a rule, the higher resistances, 1.0 ohm and 1.2 ohm, give a tight, cigarette-like mouth-to-lung draw that suits nicotine salts. The 0.8 ohm sits in the middle as a flexible restricted draw, while the 0.4 ohm and 0.6 ohm open the airflow for a warmer, airier vape with more vapour. Match the resistance to the draw you prefer.
Fitting and care
To fill a pod, pull off the mouthpiece, add your e-liquid through the top port, then push the mouthpiece back on. Let a freshly filled pod stand for a couple of minutes so the coil soaks before you vape. Because the coil is built in, there is nothing to change separately: when the flavour dulls or you notice a burnt taste, fit a fresh pod from the pack.
Key specifications
| Pack size | 4 pods |
|---|---|
| E-liquid capacity | 2ml per pod |
| Coil | Built-in mesh (Corex) |
| Resistances | 0.4, 0.6, 0.8, 1.0 and 1.2 ohm |
| Dimensions | 13 x 5.3cm |
| Weight | 8g |
| Brand | Vaporesso |
| Made in | China |
What's in the pack
- 4 x Vaporesso Xros Corex 2.0 pods (single resistance per pack)
