Product Summary
The Vaporesso XROS 3 Mini is a refillable pod kit built for beginners, powered by a 1000mAh built-in battery with USB Type-C charging. It includes a 2ml top-filling Xros pod housing an integrated 0.6 ohm mesh coil, giving a restricted direct-to-lung draw; separate MTL Xros pods can be bought for a tighter, more discreet vape. There are no buttons or menus, just inhale activation. It accepts all Xros replacement pods except the Xros Pro versions and works best with 50/50 or higher-PG e-liquids. Available in ten colours, it is an easy first kit for anyone switching from disposables.
The Vaporesso Xros 3 Mini is a refillable pod kit built as a first proper device for anyone stepping away from single-use vapes. A 1000mAh battery sits inside, charged over USB Type-C, and the kit runs between 5 and 15 watts with no wattage dial to set. It comes with a 2ml top-fill Xros pod holding an integrated 0.6 ohm mesh coil, which gives a gentle restricted direct-to-lung draw, and there are no buttons or menus anywhere, just inhale to vape. At around 40 grams and under 100mm tall, it is a genuinely pocketable kit, sold in ten colours.
Who is the XROS 3 Mini for?
Choose it if:
- You are coming off single-use vapes and want an easy first kit: fill it, charge it and vape, with none of the fiddle of coils or settings. It is a sensible starting point among the disposable vape alternatives.
- You want a small, quiet device for a light restricted or mouth-to-lung draw rather than large clouds.
- You would rather refill from a bottle and keep running costs down than keep rebuying sealed devices.
Look elsewhere if:
- You want big, warm, airy clouds; a higher-powered vape kit is the better fit for direct-to-lung vaping.
- You never want to handle e-liquid at all; a device you refill will always ask a little more of you than a sealed one.
Pods and coils
The coil is built into each pod on this kit, so pod changes are the only maintenance it asks for: once a pod loses its flavour or turns harsh, swap the whole thing. The pod in the box is a 0.6 ohm mesh version for a restricted direct-to-lung draw, and it fills from the top through a port under the mouthpiece, so you can refill without pulling the pod off the device. Beyond that one, the Xros 3 Mini takes the wider range of Xros replacement pods, including the Corex 2.0 pods, apart from the Pro-only versions: the 0.4 ohm pod is made for the Xros Pro and Xros 4 line, not this kit. For a tighter, more cigarette-like draw, higher-resistance mouth-to-lung Xros pods are sold separately. Feed it 50/50 or higher-PG e-liquid, including nicotine salt, so the coil wicks properly.
Battery and charging
The built-in 1000mAh battery is sized to get a light-to-moderate vaper through the day, and it charges over USB Type-C at 5V/1A from any standard cable. There is no fixed wattage to choose: the kit reads the pod and delivers between 5 and 15 watts to suit it. When the vapour softens, plug it in, let it top up, and carry on.
How to set up
- Charge the kit fully over USB Type-C before the first vape.
- Slide the pod out, lift the mouthpiece and drip your e-liquid into the fill port on top.
- Push the pod back in and give the fresh coil two or three minutes to draw the liquid up before you start.
- Draw on the mouthpiece to vape; the kit fires on inhale, with nothing to press.
- Top the pod up before it runs dry, and fit a fresh pod once the flavour drops off.
Key specifications
| Battery | 1000mAh, rechargeable |
|---|---|
| Output | 5-15W |
| Coil | 0.6Ω mesh, integrated in the pod |
| Pod capacity | 2ml, refillable |
| Filling | Top-fill |
| Charging | USB Type-C, 5V/1A |
| Dimensions | 99.2 x 23.6 x 13.8mm |
| Weight | 40.2g |
| Colours | 10 options |
| Made in | China |
What's in the box
- 1 x Vaporesso Xros 3 Mini device
- 1 x 2ml Xros pod (0.6Ω mesh)
- 1 x USB Type-C charging cable
- 1 x User manual
As a refillable, rechargeable open pod kit, the Xros 3 Mini sits well outside single-use territory, and like anything containing nicotine it is for adults aged 18 or over.
