What draw does each resistance give?

The 1.0 ohm coil gives a discreet mouth-to-lung draw with modest vapour, much like drawing on a cigarette, and suits nicotine salts. The 0.6 ohm opens things up for a warmer, airier restricted direct-to-lung draw with more vapour. Both are dual builds, so either ramps up quickly and carries strong flavour.

Do these coils need a particular e-liquid?

Uwell suggests a high-PG e-liquid of 50% PG or higher for both resistances. That thinner liquid wicks reliably through the mesh at these resistances and keeps the coil fed, whereas a very thick high-VG juice can wick too slowly and risk a dry, harsh draw, especially on the 1.0 ohm.

When should I replace a Valyrian coil?

Change it when the flavour starts to fade, the vapour thins out or the draw takes on a burnt, harsh edge. How long a coil lasts depends on how much you vape, your power and your e-liquid, since sweetened liquids coat the coil faster. The pack of four gives you three spares ready to go.

Will these fit any other Uwell device?

No. They are made only for the Uwell Valyrian pod kit, so they are not designed to seat in other Uwell pods or tanks. Before ordering, check that your device is the Valyrian pod; if it is, either the 0.6 ohm or 1.0 ohm coil in this range will fit it.

Uwell Valyrian Pod Replacement Coils

Checking prices...

£10.99

Brand

Uwell

Made In

China

Pack Size

4 Pack

Coil Type

Mesh

Coil Resistance

0.6Ω, 1.0Ω

Choose Flavour

Please select a flavour to continue

Select a variant to check availability

Product Summary

Uwell Valyrian Pod replacement coils are made exclusively for the Uwell Valyrian pod kit and come in a pack of 4. Two resistances cover different styles: the 1.0 Ohm coil gives a discreet MTL draw, while the 0.6 Ohm coil produces more vapour for restricted DTL vaping. Both use a dual build for quick ramp-up and stronger flavour, and Uwell suggests high-PG e-liquid of 50% PG or higher. Buy the 1.0 Ohm if you vape nic salts cigarette-style, or the 0.6 Ohm for a warmer, airier hit.

Restock your Uwell Valyrian pod kit with these mesh replacement coils, boxed four to a pack. Two resistances are offered, a 1.0 ohm and a 0.6 ohm, so you can keep the exact coil your kit runs or move between a tighter and an airier draw. Both share a dual-coil build that ramps up quickly and pulls fuller flavour.

Which kit do these coils fit?

These coils are made only for the Uwell Valyrian pod kit and are not designed for other Uwell pods or tanks. If your device is the Valyrian pod, either resistance seats the same way, so choosing between them is a question of the draw you want rather than fit. Check your kit takes the Valyrian coil before buying.

Coil options and the draw each suits

Both coils are dual mesh builds, offered in two resistances for different styles:

1.0 ohm: a discreet mouth-to-lung draw with modest vapour, close to a cigarette pull. It is the one to pick if you vape nicotine salts cigarette-style.
0.6 ohm: a warmer, airier restricted direct-to-lung draw that puts out more vapour.

Whichever you choose, Uwell suggests pairing it with a high-PG e-liquid of 50% PG or above, which wicks steadily through the mesh at these resistances.

Fitting and care

Prime every new coil before you vape it. Fit the coil into the pod, fill the pod, then let it stand a few minutes so the wick soaks up liquid; that soak is what stops a dry, burnt first draw. Keep the liquid level above the coil ports as you vape, and match the high-PG e-liquid above. Swap the coil when the flavour fades, the vapour thins or the draw starts to taste harsh.