Which kits do the GTX coils fit?

They fit GTX-platform hardware, including the Vaporesso Gen PT60, Luxe XR Max and Gen PT80 S, plus other kits and tanks that take the GTX coil. Every resistance shares the same fitting, so if your device runs a GTX coil, any option in the range will seat and fire in it correctly.

Which resistance covers which vaping style?

The spread runs from mouth-to-lung to full direct-to-lung. The 1.2 and 0.8 ohm coils give a tighter mouth-to-lung draw at low power, the 0.6 and 0.4 ohm sit in restricted direct-to-lung territory, and the 0.3 and 0.2 ohm open up for warmer direct-to-lung clouds. Pick by the draw you want, then set wattage to suit.

What e-liquid pairs with each coil?

Go by resistance. The 1.2 ohm, being 1.0 ohm and above, suits 50/50 or higher-PG e-liquid and nicotine salts for a tight draw. Every coil below 1.0 ohm wants a high-VG liquid of 70% VG or more, which feeds the mesh cleanly at higher power and keeps the vapour from turning dry or harsh.

How do I set the wattage on a new GTX coil?

Start at the lower end of the coil's suggested range and build up. Each coil is stamped with a wattage window, so a 0.2 ohm might begin near 45W and a 1.2 ohm near 7W. Priming first and easing the power up while the coil settles helps it last and keeps the early draws from tasting scorched.

Vaporesso GTX Replacement Coils

Product Summary

Vaporesso GTX replacement coils cover one of the widest resistance ranges in the Vaporesso line-up: 0.2, 0.3, 0.4, 0.6, 0.8 and 1.2 Ohm mesh options in a pack of 5. They fit popular kits such as the Gen PT60, Luxe XR Max and Gen PT80 S, spanning mouth-to-lung, restricted direct to lung and full direct to lung vaping depending on resistance. Use 50/50 or high PG e-liquid with coils of 1.0 Ohm and above, and 70%+ VG liquid below that. The mesh build heats quickly for stronger flavour, making these a flexible restock for anyone on the GTX platform.

Vaporesso GTX replacement coils are mesh coils for the GTX platform, supplied five to a pack. They cover one of the widest resistance spreads in the Vaporesso line, from 0.2 up to 1.2 ohm, so a single coil family stretches across mouth-to-lung, restricted direct-to-lung and full direct-to-lung vaping depending on which you fit. The mesh build heats the e-liquid evenly for steady flavour, and you simply restock the resistance your kit already runs.

Which tanks and kits do these fit?

The GTX coils drop into GTX-platform hardware such as the Vaporesso Gen PT60, Luxe XR Max and Gen PT80 S, along with other kits and tanks that take the GTX coil. Every resistance in the range shares the same fitting and seats the same way, so choosing a coil comes down to the draw and wattage you want rather than whether it fits.

Coil options and the draw each suits

Every coil is a mesh build, with the resistance setting both the style of draw and the power it wants. The wattages below are a starting guide; begin at the lower end and work up to taste.

Resistance	Suggested wattage	Style
0.2 ohm	45 to 60W	Direct to lung
0.3 ohm	32 to 45W	Direct to lung
0.4 ohm	26 to 32W	Restricted direct to lung
0.6 ohm	20 to 26W	Restricted direct to lung
0.8 ohm	12 to 16W	Mouth to lung
1.2 ohm	7 to 11W	Mouth to lung

Match the liquid to the resistance: coils of 1.0 ohm and above, such as the 1.2 ohm, suit 50/50 or higher-PG e-liquid, while everything below 1.0 ohm wants a high-VG liquid of 70% VG or more so the mesh stays fed at higher power.

Fitting and care

Fit a fresh coil, then prime it before vaping: drip a little e-liquid onto the exposed cotton, fill the tank and let it stand a couple of minutes so the wick soaks fully. Skipping that soak is what causes a dry, burnt first draw. Ease the wattage up from the low end of the coil's range, and swap in the next coil once the flavour fades or turns harsh.

Key specifications

Brand	Vaporesso
Pack size	5 coils
Coil type	Mesh
Resistances	0.2, 0.3, 0.4, 0.6, 0.8 and 1.2 ohm
Vaping style	MTL, restricted DTL and DTL by resistance
Made in	China