Product Summary
The Voopoo Argus Multi-Ohm Replacement Pod is a 2ml refillable pod with a built-in mesh coil for the Voopoo Argus family. Sold as a three pack, each pod flips between 1.0 ohm and 0.7 ohm for MTL vaping, with a 0.4 ohm RDTL setting on the Argus G4. The pods top-fill and pair best with 50% VG e-liquid. Ideal for anyone running an Argus kit who wants a straightforward pod and coil replacement.
The Voopoo Argus Multi-Ohm Replacement Pod keeps your Argus device filled and vaping. Each 2ml pod holds a built-in mesh coil, so the pod and coil replace together in one quick swap. Because it is a Multi-Ohm pod, a single pod covers both MTL and RDTL vaping. As a result, you can change the draw without buying a different pod.
This three pack fits a wide range of Voopoo Argus kits. First, top-fill the pod, then click it back in and vape. Meanwhile, you flip the pod to switch between the 1.0 Ohm and 0.7 Ohm settings. Voopoo recommends pairing these pods with 50% VG e-liquid.
Which kits do these pods fit?
These pods work across the Voopoo Argus family, including the Argus G4 and Argus G4 Mini. Because the coil is built into the pod, there is nothing extra to match up. The compatible kits are:
- Argus G4, Argus G4 Mini, Argus P3, Argus Matrix and Argus Klyc
- Argus G3, Argus G3 Mini, Argus G2, Argus G2 Mini Plus and Argus G2 Mini
- Argus G, Argus P1, Argus P1S, Argus P2 and Argus A
- Argus Z, Argus Z2, Argus Pod and Argus Pod SE
The table below shows each resistance setting with its wattage range.
| Argus Multi-Ohm Pod Resistance Settings | |
|---|---|
| 1.0 Ohm | Built-in mesh coil, 10W to 14W, MTL |
| 0.7 Ohm | Built-in mesh coil, 14W to 18W, MTL |
| 0.4 Ohm (Argus G4 only) | Built-in mesh coil, 18W to 30W, RDTL |
Which setting should you choose?
One Multi-Ohm pod gives you more than one resistance. So you can fine-tune the vape from a single pod. To swap between the two main settings, remove the pod and turn it 180 degrees, then push it back in.
- The 1.0 Ohm setting runs at 10W to 14W for a tight, cool MTL draw
- The 0.7 Ohm setting runs at 14W to 18W for a slightly warmer MTL draw
- The 0.4 Ohm setting runs at 18W to 30W for a looser RDTL inhale, and it works on the Argus G4 only
On the Argus G4, you reach the 0.4 Ohm setting with two quick presses of the power button. Whichever setting you pick, 50% VG e-liquid and nic salts suit these pods best.
Fitting and care
Refilling is simple because the pods fill from the top. First, open the fill port, then top up with e-liquid and press the pod back into the kit. Give a fresh pod a few minutes to soak before the first puff, so the coil primes fully. As a result, you avoid dry hits and get cleaner flavour from the start.
What's in the pack
- 3 x 2ml Voopoo Argus Multi-Ohm Replacement Pods
- 1 x User manual
