Product Summary
The GeekVape Aegis Boost 3 is a rugged refillable sub ohm pod kit with a built-in 3000mAh battery, a 5W to 60W output and both RDTL and DTL vaping. Its shock, dust and water resistant build shrugs off daily knocks, while Smart, Boost and TC-TCR modes tune every puff. A 2ml top-filling pod takes replaceable B Series coils, with 0.2 and 0.6 Ohm coils included. It suits vapers who want a tough, cloud-ready pod kit for high VG e-liquid.
The GeekVape Aegis Boost 3 is a rugged refillable sub ohm pod kit built for bigger clouds. It packs a built-in 3000mAh battery and a 5W to 60W output range. So it suits RDTL and direct to lung vapers who want power in a hardwearing shell. On top of that, it is shock, dust and water resistant.
In the box you get a 2ml refillable pod and two B Series coils. First, a 0.2 Ohm coil handles direct to lung clouds. Then a 0.6 Ohm coil gives a tighter RDTL draw. Because the pod uses replaceable coils, you simply swap the coil when it fades. A USB-C cable is also included, so you can charge straight away.
At a Glance
- Built-in 3000mAh battery for a full day of sub ohm vaping
- 5W to 60W variable output
- RDTL and DTL vaping
- Six modes: Smart, Power, Boost, TC-TCR, Memory and Eco
- Stepless adjustable airflow control
- Button activated with a childproof lock
- Shock, dust and water resistant build
- 2ml top-filling refillable pod, 0.2 and 0.6 Ohm B Series coils included
Who is the Aegis Boost 3 for?
Choose it if:
- You want a rugged sub-ohm pod kit with a big battery for daily DTL vaping
- You are moving up from a starter kit and want a refillable pod kit
- You like to fine-tune the draw with adjustable airflow
Look elsewhere if:
- You prefer a tight cigarette-like draw: a mouth to lung pod kit suits that better
- You want a simpler device: the GeekVape Aegis Boost 2 is a more streamlined option
A Rugged Sub Ohm Pod in the Hand
The Aegis Boost 3 keeps the tough Aegis look, with a metal frame and a grippy textured side panel. It measures 112 by 41 by 31mm and weighs 160g. So it feels solid and hardwearing in the hand. Because it is shock, dust and water resistant, it copes well with daily knocks.
On top of that, the range spans eight finishes. These run from stealthy darks to brighter accents. In short, there is a colour for most tastes:
- Black, Silver and Midnight Gold for a clean, understated look
- Sapphire Blue and Teal Blue for a cooler, fresher accent
- Sunset Red, Midnight Red and Rainbow Purple for a bolder finish
A Full Day of Sub Ohm Power
The built-in 3000mAh battery is large for a pod kit. As a result, it comfortably powers a full day of sub ohm vaping for most people. You then charge it back up over the included USB-C cable.
Control stays flexible too. First, Smart Mode reads your coil and sets the wattage for you. Then Power Mode lets you fine-tune the output across 5W to 60W. Meanwhile, Boost Mode lifts flavour and vapour, and TC-TCR Mode holds a set temperature. Memory Mode also saves your settings per coil, while Eco Mode stretches the battery further.
Refillable Pods and B Series Coils
The Aegis Boost 3 uses a 2ml refillable pod that fills from the top. First, open the top-filling port, then add your e-liquid and close it. The childproof lock also keeps the device secure between puffs.
This pod takes replaceable B Series coils, so you change the coil instead of the whole pod. The kit includes a 0.2 Ohm coil for DTL clouds and a 0.6 Ohm coil for a tighter RDTL draw.
It also works with the full range of GeekVape Aegis Boost coils. Because it is a sub ohm kit, we recommend a 70% VG e-liquid or higher. Each coil runs best at its own setting, shown in the table below.
| Aegis Boost 3 Coil Options | |
|---|---|
| 0.2Ω B Series Coil (Included) | DTL, Big Clouds |
| 0.6Ω B Series Coil (Included) | RDTL, Tighter Draw |
| 0.4Ω B Series Coil (Sold Separately) | DTL, Balanced Clouds |
Adjustable Airflow for RDTL and DTL
The Aegis Boost 3 gives you real control over the draw. First, slide the airflow control to tighten or open the inhale. So you can set an airy DTL draw or a tighter RDTL one.
Because the airflow is fully adjustable, one device covers two vaping styles. For example, pair an open setting with the 0.2 Ohm coil for clouds. Then switch to a tighter setting and the 0.6 Ohm coil for a more discreet vape.
What's in the Box
- 1 x GeekVape Aegis Boost 3 device
- 1 x GeekVape Boost 2 pod (2ml)
- 1 x 0.2 Ohm B Series coil
- 1 x 0.6 Ohm B Series coil
- 1 x Coil tool
- 1 x USB-C cable
- 1 x User manual
