Which pods does the GeekVape Soul 2 use?

It uses GeekVape Soul pods, and the kit includes two: a 1.0 Ohm pod and a 0.6 Ohm pod. Both hold 2ml of e-liquid and fill from the side. Each has a built-in mesh coil, so you replace the whole pod rather than a separate coil once the flavour fades.

How long does the battery last and how do I charge it?

The built-in 2100mAh battery lasts most vapers a full day between charges. When it runs low, you charge it over USB-C, and a cable is included in the box. You can keep vaping on either pod while you learn how long a charge lasts for you.

What is the difference between the MTL and RDTL pods?

The 1.0 Ohm pod gives a tight mouth to lung draw, much like a cigarette. The 0.6 Ohm pod loosens the inhale for a restricted direct to lung draw, with a little more warmth and vapour. You can also fine-tune either one with the airflow slider on the pod.

What nicotine strength and e-liquid should I use?

The Soul 2 is designed for 50% VG e-liquid, which covers most nicotine salts and balanced 50/50 blends. If you smoked around 10 or more a day, a 20mg nicotine salt is a common starting point. Lighter smokers often prefer 10mg, while 5mg suits very light or social smokers. You can then step down over time as cravings ease.

Is the GeekVape Soul 2 a disposable vape?

No. It is a rechargeable, refillable pod kit and a longer-lasting alternative to disposables. You add your own e-liquid, recharge over USB-C and swap the pod when the coil fades. It is legal to buy and use in the UK for over-18s.

GeekVape Soul 2 Pod Kit | 2100mAh MTL & RDTL Kit

Product Summary

The GeekVape Soul 2 is a slim refillable pod kit with a 2100mAh battery, 5 to 35W output and two 2ml side-filling Soul pods included. It charges over USB-C and fires when you inhale, while Smart Mode reads each pod and sets the output for you. The 1.0 Ohm pod gives a tight MTL draw and the 0.6 Ohm pod opens up for RDTL, both suited to 50% VG e-liquid. Ideal as an easy all-day refillable for anyone leaving disposables behind, in eight colours.

The GeekVape Soul 2 is a slim, refillable pod kit built for easy all-day vaping. It pairs a large 2100mAh battery with a 5 to 35W output. So you simply fill a pod, click it in and inhale to fire. As a result, beginners and seasoned vapers alike can pick it up in seconds.

In the box you get two GeekVape Soul pods, in 0.6 Ohm and 1.0 Ohm. Because each pod holds its own mesh coil, one opens up a looser RDTL draw while the other keeps a tight MTL inhale. Meanwhile, Smart Mode reads your pod and sets the output for you. A USB-C cable is included too, so you can charge straight away.

At a Glance

2100mAh built-in battery that lasts most vapers a full day
5W to 35W variable output range
Inhale activation, plus a fire button when you prefer it
Smart Mode that auto-selects the output for your pod
Hidden 0.99 inch screen for battery level and puff count
2ml side-filling refillable pods, 0.6 and 1.0 Ohm included
Built-in mesh coils for both MTL and RDTL draws
Adjustable airflow slider with USB-C fast charging

Who is the Soul 2 for?

Choose it if:

You want a simple refillable pod kit with a long-lasting battery for daily carry
You are leaving disposables behind and want an easy mouth to lung draw
You like to tune the inhale with adjustable airflow and two pod options

Look elsewhere if:

You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
You never want to refill or recharge: this kit needs your own e-liquid

A Slim Body in Eight Finishes

The Soul 2 keeps a slim, rounded body that sits easily in the hand. It measures 109 by 33 by 24mm and weighs 93g. So it slips into a pocket or bag without weighing you down. On top of that, a hidden 0.99 inch screen wakes on cue, showing battery life and puff count at a glance.

The range spans eight finishes, from soft pastels to classic black:

Mist Purple, Blush Pink and Harbor Blue for a soft pop of colour
Sands Beige, Pearl White and Olive Green for a muted, natural look
Urban Gray and Black for a classic, understated finish

A Full Day of Power

The 2100mAh battery is generous for such a slim device. As a result, it comfortably covers a full day of vaping for most people. When it runs low, USB-C fast charging tops it back up, and the included cable means you are ready from the start.

Firing is just as simple. Because Smart Mode reads your pod, it sets the ideal output within the 5W to 35W range. First insert a pod and inhale to vape, or press the button instead. Then check the hidden screen for battery and puff count.

GeekVape Soul Pods

First, side-fill the 2ml Soul pod, then press it back in and start vaping. Because the pods fill from the side, you can refill without removing the pod from the device. Each pod carries a built-in mesh coil, so flavour stays clean and there are no separate coils to change.

The kit includes two pods. The 1.0 Ohm pod gives a discreet MTL inhale, while the 0.6 Ohm pod opens up to a looser RDTL draw. We recommend pairing both with a 50% VG e-liquid for the best results. Each pod runs at its own resistance, shown in the table below.

Soul Pod Version & Resistance
2ml, 1.0 Ohm (Included)	Side Filling, Mesh Coil, MTL
2ml, 0.6 Ohm (Included)	Side Filling, Mesh Coil, RDTL

Adjustable Airflow, Two Draws

The Soul 2 gives you real control over the inhale. First, an airflow slider on the pod lets you tighten or open the draw. So you can set a snug MTL pull or loosen it for a softer RDTL one. On top of that, switching between the two pods changes the style again.

The 1.0 Ohm pod suits a tight, cigarette-like MTL vape. The 0.6 Ohm pod instead loosens things for warmer, airier RDTL clouds. As a result, one small kit covers several vaping styles from a single device.