GeekVape Sonder Q2 Pod Kit

The GeekVape Sonder Q2 is a compact refillable pod kit for easy, all-day vaping. It packs a large 1350mAh battery and puts out up to 30W. So you just add your own e-liquid, click a pod in and inhale to fire. As a result, there are no buttons to press and no menus to learn.

In the box you get a 2ml Sonder Q pod in 0.8 Ohm. Because the pods use a built-in mesh coil, they heat quickly for cleaner flavour. Meanwhile, the pod range covers both MTL and RDTL vaping. However, note that a USB-C cable is not included.

At a Glance

• 1350mAh built-in battery that lasts most vapers a full day
• Full recharge in under two hours over USB-C
• Up to 30W output
• Inhale-activated firing, with no fire button
• Adjustable airflow slider for MTL and RDTL draws
• RGB light that shows the battery level
• 2ml top-filling refillable Sonder Q pods
• Built-in mesh coil for quick, clean flavour

Who is the Sonder Q2 for?

Choose it if:

• You want a simple refillable pod kit with a long-lasting battery for daily carry
• You are leaving disposables behind and want an easy mouth to lung draw
• You like to tune the draw with adjustable airflow and switch between MTL and RDTL

Look elsewhere if:

• You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
• You never want to refill or recharge: this kit needs your own e-liquid and a USB-C cable

A Slim Body in Ten Colours

The Sonder Q2 keeps a slim, pocket-friendly shape that sits easily in the hand. It measures 117 by 25 by 14mm and weighs just 40g. So it stays light in a pocket or bag all day. On top of that, a smooth satin-look finish gives it a smart, understated feel.

The range also spans ten colours, so there is a shade for every taste. In total, you can pick from:

• Midnight Black, Moonlight Silver and Mocha Gold for a classic look
• Burgundy Red, Metallic Purple and Sakura Pink for a bolder accent
• Ocean Blue, Misty Blue, Olive Green and Apricot Yellow for something brighter

A Full Day of Power

The 1350mAh battery is generous for such a slim device. As a result, it comfortably covers a full day of vaping for most people. When it runs low, the RGB light on the front lets you know. A USB-C cable then recharges it in under two hours.

Because there is no fire button, you simply inhale to vape. First insert a pod, then draw on the mouthpiece and the kit fires automatically. So getting started could not be easier.

Sonder Q Pods and Mesh Coils

First, top-fill the 2ml Sonder Q pod, then press it into place and start vaping. Because the pods fill from the top, you can refill without removing the pod. Each pod uses a built-in mesh coil, so it heats e-liquid quickly for cleaner flavour.

The Sonder Q pods come in several resistances, from 0.4 Ohm up to 1.2 Ohm. So you can lean towards a tighter MTL draw or a looser RDTL one. We recommend pairing them all with 50/50 e-liquid. Each pod runs best at its own wattage, shown in the table below.

Adjustable Airflow and Two Draw Styles

The Sonder Q2 gives you real control over the draw. First, the airflow slider on the side lets you tighten or open the inhale. So you can set a snug MTL draw or a more open RDTL one.

Close the airflow for a tight, cigarette-like MTL vape. Open it up instead for a warmer, airier RDTL draw with a little more vapour. As a result, one small device suits several vaping styles.

What's in the Box

• 1 x GeekVape Sonder Q2 device
• 1 x 0.8 Ohm Sonder Q pod (2ml)
• Please note: a USB-C cable is not included