GeekVape Aegis Force Pod Kit

The GeekVape Aegis Force is a rugged, refillable sub ohm pod kit built for bigger clouds and longer days. It packs a built-in 3200mAh battery and a 5W to 80W output range. So it suits vapers who want real power in a tough, pocket-friendly body. You simply fill the pod, click it in and vape.

The kit uses side-filling pods and swappable Geekvape B Series coils. Two coils come included, a 0.4 Ohm and a 0.6 Ohm, so you can start straight away. A USB-C cable is also in the box. On top of that, an MTL and a DTL drip tip let you shape the draw.

At a Glance

• Built-in 3200mAh battery for all-day sub ohm sessions
• Recharges in around 115 minutes over USB-C
• 5W to 80W variable output
• MTL, RDTL and DTL vaping
• Smart Mode and Power Mode
• 0.96-inch TFT colour screen
• Adjustable airflow ring on the pod
• 2ml side-filling pod with swappable B Series coils

Who is the Aegis Force for?

Choose it if:

• You want a sub-ohm pod kit with a big battery for daily vaping
• You want one device that covers MTL, RDTL and DTL styles
• You like to tune the draw with adjustable airflow

Look elsewhere if:

• You prefer a tight cigarette-like draw only: a mouth to lung pod kit suits that better
• You want the smallest possible device: a compact pod kit is easier to pocket

A Rugged Pod Kit in the Hand

The Aegis Force keeps a chunky, armoured shape that feels solid in the hand. It measures 128 by 36 by 30mm and weighs 189g. So it has real presence without being pocket-heavy. A bright colour screen and a sturdy frame also give it a sporty, tough look.

On top of that, the range spans six finishes. These run from stealthy tones to brighter accents. In short, there is a colour for most tastes:

• Black Carbon and Ivory White for a clean, understated look
• Green Moss and Iris Purple for a cooler, richer accent
• Canyon Orange and Chameleon Prism for a bolder, standout finish

A Full Day of Power

The built-in 3200mAh battery is large, even for a sub ohm kit. As a result, it comfortably powers a full day for most vapers. When it runs low, it recharges in around 115 minutes over USB-C.

Control stays flexible too. First, use Smart Mode and the device sets a safe wattage for your coil. Then switch to Power Mode to dial the output yourself, anywhere from 5W to 80W. Meanwhile, the 0.96-inch colour screen shows your wattage, battery level and coil resistance, while a single button fires the device.

Side-Filling Pods and B Series Coils

The 2ml pod fills from the side in seconds. First, remove the stopper on the side, then top it up and push it back in. Because the coils are removable, you simply swap the coil when the flavour fades, rather than the whole pod.

The pod takes Geekvape B Series coils, which run from 0.2 Ohm to 0.6 Ohm. The kit includes a 0.4 Ohm and a 0.6 Ohm coil to start. For MTL or RDTL vaping, pair the 0.6 Ohm or 0.4 Ohm coil with a 50% VG e-liquid. For DTL clouds, use the 0.2 Ohm coil with a high VG e-liquid instead.

You can also buy more Geekvape B Series coils separately, and each one runs best at its own wattage, shown in the table below.

Adjustable Airflow for Every Draw

The Aegis Force gives you genuine control over the inhale. First, turn the airflow ring on the base of the pod to open or close it. So you can set an airy DTL draw or a tighter MTL one.

Because the airflow adjusts freely, one device covers several styles. For example, open it up with the 0.2 Ohm coil for clouds. Then close it down with the 0.6 Ohm coil for a more discreet, cigarette-like vape. Two drip tips are also included to match each style.

What's in the Box

• 1 x GeekVape Aegis Force device
• 1 x Aegis Force pod (2ml)
• 1 x 0.4 Ohm Geekvape B coil (Boost version)
• 1 x 0.6 Ohm Geekvape B coil (Boost version)
• 1 x MTL drip tip
• 1 x DTL drip tip
• 1 x USB-C cable
• 1 x User manual