Which coils and pods does the Aegis Hero 5 use?

It uses a 2ml top-filling pod and replaceable B-Series mesh coils. A 0.2 Ohm coil and a 0.4 Ohm coil come included. When a coil burns out or the flavour fades, simply fit a fresh B-Series coil.

How long does the battery last and how do I charge it?

The built-in 2000mAh battery lasts most vapers a full day. You charge it over USB-C at 2A, so it refills in under an hour. There is no need to remove or replace any cells.

What is the difference between MTL, RDTL and DTL?

MTL is a tight, cigarette-like draw, while DTL is an open, airy inhale for bigger clouds. RDTL sits in between the two. The included coils suit a loose DTL draw, and the airflow slider lets you tighten or open each inhale.

What e-liquid should I use with it?

The included 0.2 Ohm and 0.4 Ohm coils are sub ohm, so they suit a 70% VG e-liquid at a low nicotine strength. As a rough guide, most sub ohm vapers use 3mg or 6mg freebase liquid. If you smoked around 10 a day, 6mg is a sensible starting point, while heavier smokers may prefer a tighter MTL setup. Browse our 70% VG e-liquids to get started.

Is this a disposable vape?

No. It is a rechargeable, refillable pod kit and a longer-lasting alternative to disposables. You refill the 2ml pod with your chosen e-liquid and swap the coil when needed.

GeekVape Aegis Hero 5 Pod Kit | 2000mAh Sub Ohm Kit

Product Summary

The GeekVape Aegis Hero 5 is a rugged 2000mAh sub ohm pod kit with a 5-50W output, a shockproof body and MTL, RDTL and DTL vaping. It recharges over USB-C in under an hour and reads your coil in Smart Mode. The 2ml top-fill pod takes replaceable B-Series mesh coils. It suits vapers who want a tough, flexible high-VG kit for flavour and clouds.

The GeekVape Aegis Hero 5 is a rugged sub ohm pod kit built for everyday durability. Its shockproof body holds a 2000mAh battery, so it lasts most vapers all day. On top of that, it recharges over USB-C in under an hour. You also get a 5-50W output range and the Aegis DNA chipset, so power stays steady every time you press the button.

This kit ships with a 2ml top-filling pod and two replaceable B-Series mesh coils. As a result, you can vape MTL, RDTL or DTL from one device. The included 0.2 Ohm and 0.4 Ohm coils suit a loose direct-to-lung draw. Meanwhile, a USB-C cable, info card and user manual round out the box.

At a Glance

2000mAh built-in battery
Recharges in under an hour via 2A USB-C
5-50W adjustable output
Button activated with a lock switch
Smart Mode and Variable Wattage Mode
2ml top-filling pod
MTL, RDTL and DTL draw styles
Adjustable airflow slider

Who is the GeekVape Aegis Hero 5 for?

The Aegis Hero 5 suits vapers who want a tough, pocket-friendly sub ohm kit. Because the included coils favour a loose DTL draw, it works best with high-VG e-liquids. So it is a strong pick if you enjoy warmer clouds and fuller flavour. It also helps if you want a device that shrugs off knocks and drops.

It is less ideal if you only want a tight MTL vape at higher nicotine. For that, a dedicated MTL pod kit fits better. New vapers who prefer inhale activation may also want a simpler pod. Browse our sub ohm pod kits or the wider GeekVape pod kit range to compare.

Built Tough, Carried Easy

The Aegis Hero 5 wraps its 2000mAh battery in a shockproof, hard-wearing shell. As a result, it handles daily knocks that would mark a plainer pod. At 9.5cm tall and 116g, it still slips into a pocket with ease. A grippy textured side panel and a metal-effect frame give it a rugged feel. A small screen also shows your wattage, battery and lock status at a glance.

Blaze Red
Iron Black
Racing Green
Turbo Blue
Frost Mint
Pure White

Power That Keeps Up

The built-in 2000mAh battery carries most vapers through a full day. When it runs low, a 2A USB-C charge tops it up in under an hour. So downtime stays short between sessions. The 5-50W output also covers gentle draws right through to warmer DTL clouds.

Two modes keep things flexible. Smart Mode reads the coil and sets a suitable wattage for you. Alternatively, Variable Wattage Mode lets you dial the power yourself. A lock button also prevents accidental firing while the kit is in your pocket.

Pods, Coils and Flavour

The Aegis Hero 5 uses a 2ml top-filling pod, so refills stay quick and clean. Inside sit replaceable B-Series mesh coils, which heat e-liquid fast for fuller flavour and vapour. The kit includes a 0.2 Ohm and a 0.4 Ohm coil, and both suit a loose DTL draw. For that reason, they pair best with a 70% VG e-liquid at a lower nicotine strength.

When a coil burns out or the flavour fades, simply swap in a fresh B-Series coil. You can also fit other B-Series resistances to fine-tune your draw, as shown in the table below. If a pod ever wears out, fit a fresh Aegis Hero 5 replacement pod.

Aegis Hero 5 Coil Range
0.2 Ohm B-Series (Included)	Mesh, DTL, 50-58W
0.4 Ohm B-Series (Included)	Mesh, DTL, 25-30W

Dial In Your Draw

A small airflow slider sits on top of the pod. As a result, you can open it up for airy DTL clouds or close it down for a tighter pull. This lets one kit cover MTL, RDTL and DTL styles. So you can match the draw to your mood or your e-liquid. Small adjustments also make a real difference to both flavour and vapour.