Innokin Coolfire Z80 Nex Vape Kit

The Innokin Coolfire Z80 Nex is a compact and sturdy sub ohm box mod for flexible all-day vaping. It runs on a single removable 18650 battery, so you can swap in a charged cell whenever one runs low. Its 6 to 80W output then drives the included Zenith M tank for warm flavour and satisfying vapour. Please note that the 18650 battery is sold separately.

In the box you also get two Innokin Z coils, a 0.8 Ohm and a 0.3 Ohm. Because these coils span several draw styles, the kit covers MTL, RDTL and DTL vaping from one tank. Meanwhile, Smart Mode reads your coil and sets a safe wattage for you. As a result, you can start simply and then fine tune the draw later.

At a Glance

• Powered by a single 18650 battery, which is sold separately
• 6W to 80W variable wattage output
• Smart Mode plus manual power adjustment
• MTL, RDTL and DTL vaping from the Z coil range
• 2ml top-filling Zenith M tank with adjustable airflow
• 0.96 inch TFT colour screen
• Locking switch to prevent accidental firing
• USB-C charging cable included

Who is the Coolfire Z80 Nex for?

Choose it if:

• You want a flexible sub ohm kit that swaps between MTL, RDTL and DTL vaping
• You like carrying a spare charged 18650 so the device never runs flat
• You want to tune each inhale with adjustable airflow and variable wattage

Look elsewhere if:

• You prefer a built-in battery: the older Coolfire Z80 Zenith II kit is a simpler choice
• You never want to buy batteries separately or carry a charger

A Sturdy, Pocket-Ready Body

The Coolfire Z80 Nex keeps a compact box shape that sits securely in the hand. It measures 39 by 130 by 27mm and weighs just 141g with the tank fitted. So it stays easy to pocket for the day.

On top of that, a textured side panel adds grip and a smart finish. Because Innokin offers several shades, you can match the mod to your style. In total, there are six colours to pick from:

• Black, Silver and Gunmetal for a classic metal look
• Gradient Blue, Turquoise and Purple for a brighter accent

Bring Your Own 18650

The Coolfire Z80 Nex uses a single removable 18650 battery, which is sold separately. Because the cell is removable, you can charge a spare and swap it in seconds. As a result, heavy vapers avoid waiting for a recharge.

When a battery is fitted, the included USB-C cable tops it up in the device. Meanwhile, the 0.96 inch TFT screen shows your wattage, coil resistance and battery level at a glance. First pick Smart Mode for an automatic setting, or hold the buttons to adjust the wattage yourself.

Zenith M Tank and Z Coils

First, top-fill the 2ml Zenith M tank through its filling port, then attach it to the mod. Because it fills from the top, you can refill without removing the tank. The kit includes a 0.8 Ohm and a 0.3 Ohm Z coil. It also accepts the wider Innokin Z coil range.

We recommend pairing the lower resistance coils with a 70% VG e-liquid for DTL clouds. For a tighter MTL or RDTL draw, use a higher resistance coil with a 50% VG e-liquid. Each coil runs best at its own wattage, shown in the table below. Meanwhile, replacement Innokin Z coils are on hand for when a coil fades.

Airflow and Three Draw Styles

The Zenith M tank gives you real control over the draw. First, the adjustable airflow lets you tighten or open each inhale. So you can set a snug MTL draw, a middle RDTL one, or a loose DTL one.

Because the Z coils cover a wide resistance range, one kit suits several styles. As a result, you can vape gently on higher resistances, then chase more vapour on the 0.3 Ohm coil. In short, it adapts as your taste changes.

What's in the Box

• 1 x Innokin Coolfire Z80 Nex mod
• 1 x Innokin Zenith M tank
• 1 x 0.8 Ohm Z replacement coil
• 1 x 0.3 Ohm Z replacement coil
• 1 x Spare glass
• 1 x Spare drip tip
• 1 x Set of O-rings
• 1 x USB-C charging cable
• 1 x User manual
• Please note: an 18650 battery is not included