Which pods does the Voopoo Vmate E2 use?

It uses Voopoo Vmate V2 top-fill pods, and both a 0.4 Ohm and a 0.7 Ohm pod come included. The 0.4 Ohm pod gives an airier RDTL draw, while the 0.7 Ohm pod suits a tighter MTL vape. A 1.2 Ohm Vmate V2 pod is also sold separately for an even tighter inhale. Each pod fills from the top and uses a built-in mesh coil.

How long does the battery last and how do I charge it?

The built-in 1500mAh battery lasts most vapers a full day between charges. When it runs low, the digital display shows the level. You then recharge it with the included USB-C cable, which gives a full charge in around 45 minutes.

What is the difference between MTL and RDTL vaping?

MTL, or mouth to lung, is a tight draw that feels like a cigarette. RDTL, or restricted direct to lung, is a slightly airier draw with a little more vapour. The 0.7 Ohm pod suits MTL, while the 0.4 Ohm pod suits RDTL. You also fine-tune each style with the airflow slider.

What e-liquid should I use with it?

The Vmate E2 is designed for 50/50 e-liquid, which covers most balanced nicotine salts and freebase blends. For strength, a rough guide helps. Around 3 to 7 cigarettes a day suits about 10mg salt, while a pack a day or more suits 20mg. Lighter smokers can start at 5mg or below. Nicotine salts also give a smoother throat hit at higher strengths.

Is this a disposable vape?

No. It is a rechargeable, refillable pod kit and a longer-lasting alternative to disposables. You refill the 2ml pod with your own e-liquid and recharge over USB-C. As a result, it costs less to run and creates less waste than single-use vapes.

Voopoo Vmate E2 Pod Kit | 1500mAh MTL & RDTL Kit

Product Summary

The Voopoo Vmate E2 is a compact refillable pod kit with a 1500mAh battery, up to 30W output and two included Vmate V2 top-fill mesh pods. It charges over USB-C in around 45 minutes and fires automatically when you inhale, with no buttons or menus to learn. The 0.4 Ohm and 0.7 Ohm pods cover both RDTL and MTL vaping, while adjustable airflow and Smart Mode tune the draw. Pair it with 50/50 e-liquid. Ideal as an easy all-day refillable for anyone leaving disposables behind, in eight colours.

The Voopoo Vmate E2 is a simple, refillable pod kit built for easy all-day vaping. It carries a large 1500mAh battery and a 2ml top-fill pod. So you just add your own e-liquid, click a pod in and inhale to fire. As a result, there are no buttons to press and no menus to learn.

In the box you get two Vmate V2 pods, a 0.4 Ohm and a 0.7 Ohm. Because they cover both RDTL and MTL vaping, you can switch styles from day one. Meanwhile, Smart Mode reads each pod and sets the wattage for you. A USB-C cable is included too, so you can charge straight away.

At a Glance

1500mAh built-in battery that lasts most vapers a full day
Full USB-C charge in around 45 minutes
Up to 30W output with automatic Smart Mode
Inhale-activated firing, with no fire button
Adjustable airflow slider for MTL and RDTL draws
Digital display showing the battery level
2ml top-fill refillable pods, 0.4 Ohm and 0.7 Ohm included
Built-in mesh coils for cleaner flavour

Who is the Vmate E2 for?

Choose it if:

You want a simple refillable pod kit with a long-lasting battery for daily carry
You are leaving disposables behind and want an easy mouth to lung draw
You like to tune the draw with adjustable airflow and switch between MTL and RDTL
You are upgrading from the earlier VooPoo Vmate E and want a bigger battery with faster charging

Look elsewhere if:

You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
You never want to refill or recharge: this kit needs your own e-liquid

A Slim Pen You Can Carry Anywhere

The Vmate E2 keeps a slim, pen-style shape that sits easily in the hand. It measures 95 by 34 by 19mm and weighs just 90g. So it stays light in a pocket or bag all day. On top of that, a small digital display sits on the front, next to the airflow slider.

The range also spans eight finishes, from classic understated styles to brighter tones. In short, there is a colour for most tastes:

Jet Black, Walnut Brown and Seashell White for a classic everyday look
Navy Blue and Emerald Green for a deeper, richer tone
Rose Red and Lavender Purple for a brighter accent
Urban Camo for a textured, rugged finish

A Full Day of Power

The 1500mAh battery is generous for such a slim device. As a result, it comfortably covers a full day for most vapers. When it runs low, the digital display shows the level. A USB-C cable then recharges it in around 45 minutes.

Because there is no fire button, you simply inhale to vape. First insert a pod, then Smart Mode reads its resistance. After that, it sets the ideal wattage for you, up to 30W.

Vmate V2 Top-Fill Pods

First, top-fill the 2ml Vmate V2 pod, then press it into place and start vaping. Because the pods fill from the top, you can refill without removing the pod. Each pod also uses a built-in mesh coil, so it heats e-liquid quickly for cleaner flavour.

The included 0.4 Ohm pod gives an airier RDTL inhale, while the 0.7 Ohm pod suits a tighter MTL draw. Meanwhile, a separate 1.2 Ohm Vmate V2 pod suits an even tighter MTL vape. We recommend pairing all three with a 50% VG e-liquid. Each pod runs best at its own wattage, shown in the table below.

Vmate Pod Version & Resistance
2ml, 0.4 Ohm (Included)	Top Filling, Mesh, RDTL, 18-30W
2ml, 0.7 Ohm (Included)	Top Filling, Mesh, MTL, 15-25W
2ml, 1.2 Ohm (Sold Separately)	Top Filling, Mesh, MTL, 8-15W

Airflow to Match Your Style

The Vmate E2 gives you real control over the draw. First, the airflow slider on the front lets you tighten or open each inhale. So you can set a snug MTL draw or a looser RDTL one. As a result, one small device suits several vaping styles.

For example, pair the 0.7 Ohm pod with a tighter setting for a cigarette-like MTL vape. Then switch to the 0.4 Ohm pod with more open airflow for a warmer RDTL hit. In short, you change the feel without changing device.