Product Summary
Uwell Caliburn GPP Replacement Pods fit the full modern Caliburn range, from the G3, G3 Pro and GK3 Tenet to the G4, G4 Mini and G5 family. Each pod holds 2ml, fills from the top and has a built-in mesh coil. Choose 0.4, 0.6, 0.9 or 1.2 ohm to match MTL or RDTL vaping. Ideal four-pack spares for any modern Caliburn kit owner.
Uwell Caliburn GPP Replacement Pods keep your Caliburn kit running at its best. Each pod holds 2ml of e-liquid and fills from the top, so topping up takes only a moment. Every pod also has a built-in mesh coil, which means there is nothing extra to fit.
You can choose from four resistances to suit your style. The 0.9 and 1.2 ohm pods give a tight mouth to lung draw, while the 0.4 and 0.6 ohm pods open up for restricted direct to lung clouds. These GPP pods have replaced the older Caliburn G3 pods, and they fit the same kits.
Which kits do these pods fit?
These pods fit right across the modern Caliburn range. That covers the Caliburn G3, Caliburn G3 Lite, Caliburn G3 Lite Koko, Caliburn GK3 Tenet, Caliburn G3 Pro and Caliburn G3 Pro Koko.
They also fit the Caliburn G4, Caliburn G4 Mini, Caliburn G4 Pro, Caliburn G4 Pro Koko and Caliburn G4 Classic. Finally, the full Caliburn G5 family works too, including the G5, G5 Lite, G5 Koko, G5 Lite Koko and G5 Lite SE.
Because the GPP pods replaced the older Caliburn G3 pods, they also suit any kit that used a G3 pod before. The table below lists every resistance at a glance.
| Caliburn GPP Pod Guide Table | |
|---|---|
| 0.4 Ohm (4 Pack) | Built-In Mesh Coil, 35W, RDTL, 2ml |
| 0.6 Ohm (4 Pack) | Built-In Mesh Coil, 25W, RDTL, 2ml |
| 0.9 Ohm (4 Pack) | Built-In Mesh Coil, 15W, MTL, 2ml |
| 1.2 Ohm (4 Pack) | Built-In Mesh Coil, 13W, MTL, 2ml |
Which resistance should you choose?
For a tight mouth to lung draw, pick the 1.2 ohm pod, which runs best around 13 watts. The 0.9 ohm pod then steps up to roughly 15 watts for a slightly warmer inhale.
If you prefer a looser, airier vape, the 0.6 ohm pod suits restricted direct to lung at about 25 watts. Meanwhile, the 0.4 ohm pod opens up further at around 35 watts. Every resistance pairs best with 50% VG 50/50 e-liquid.
Fitting and care
Push a fresh pod into your kit until it clicks firmly into place. Next, lift the top stopper, add your e-liquid and reseal it. Because a new coil needs to soak, wait a few minutes before your first puff. Each pod has a built-in coil, so you simply swap the whole pod when the flavour starts to fade.
What's in the pack
- 4 x Uwell Caliburn GPP Pods, in your chosen resistance
