Product Summary
The Uwell Caliburn G3 Pro Koko is a slim square pod kit with a 1250mAh battery, 5-35W output and 2ml refillable G3 mesh pods. It charges over USB-C and fires when you inhale, with a clear display screen for control. The included 0.4 and 0.9 Ohm pods cover both MTL and RDTL vaping, while Smart Mode and adjustable airflow tune the draw. Pair it with 50/50 e-liquid. Ideal as an easy all-day pod kit for anyone leaving disposables behind.
The Uwell Caliburn G3 Pro Koko is a slim square pod kit that suits new and returning vapers alike. It packs a 1250mAh battery, so it comfortably lasts most people a full day. Because it charges over USB-C, you are rarely left waiting. You just add your own e-liquid, click a pod in and inhale to fire.
In the box you get two Caliburn G3 pods, so you can vape straight away. As a result, there is no fiddly setup to learn first. The kit also supports both MTL and RDTL draws, meanwhile Smart Mode picks a suitable power for you. On top of that, a USB-C cable and a lanyard are both included.
At a Glance
- 1250mAh built-in battery for all-day vaping
- 5-35W variable output
- MTL and RDTL vaping from the included pods
- Inhale and button activation
- Smart Mode coil detection, plus Variable Wattage mode
- Built-in display screen for quick control
- 2ml refillable G3 pods with built-in mesh coils
- Adjustable airflow for MTL and RDTL draws
Who is the Uwell Caliburn G3 Pro Koko for?
Choose it if:
- You want a simple refillable pod kit with a slim body for daily carry
- You are leaving disposables behind and want an easy mouth to lung draw
- You like to fine-tune the inhale with adjustable airflow
Look elsewhere if:
- You want big clouds: a sub-ohm kit suits direct to lung vaping better
- You never want to refill or recharge: this kit needs your own e-liquid
A Slim Koko in the Hand
The G3 Pro Koko keeps the classic square Koko shape that fits neatly in a palm. It measures 79 by 49 by 20mm and weighs just 97g. So it stays light in a pocket or bag all day. On top of that, a clear display screen sits on the front for quick control. Right now it comes in a single finish:
- Light Silver, for a clean and understated look
All-Day Power and Smart Mode
The 1250mAh battery is generous for such a slim device. As a result, it easily covers a day for most vapers. When it runs low, the included USB-C cable then recharges it. Because Smart Mode reads each pod, it also sets a suitable output for you. However, you can adjust the wattage yourself, while the output tops out at 35W. Meanwhile, the display screen keeps track of any changes.
Caliburn G3 and GPP Pods
First, refill the 2ml pod, then press it in and start vaping. Because you remove the rubber insert on the side, refilling stays quick and clean. Each pod also has a built-in mesh coil, so flavour comes through fast. When the taste turns burnt, you simply swap the whole pod.
The kit ships with two Caliburn G3 pods, and it also takes the wider Caliburn GPP range. Meanwhile, we recommend a 50% VG e-liquid for a balanced result. Each pod runs best at its own wattage, shown in the table below.
| Caliburn Pod Version & Resistance | |
|---|---|
| Caliburn G3 Pods, 2ml (0.4 & 0.9 Ohm Included) | Built-in mesh, side-fill. 0.4 Ohm (5-25W), 0.6 Ohm (5-25W), 0.8 Ohm and 1.0 Ohm (5-10W). |
| Caliburn GPP Pods, 2ml (Compatible) | Also fit the G3 Pro Koko. 0.4 Ohm (35W), 0.6 Ohm (25W), 0.9 Ohm (15W) and 1.2 Ohm (13W). |
Adjustable Airflow, Two Draws
The G3 Pro Koko gives you real control over the draw. First, the adjustable airflow lets you tighten or open the inhale. So you can set a snug MTL draw with the 0.9 Ohm pod. Instead, the 0.4 Ohm pod opens things up for a looser RDTL vape. As a result, one small device suits several vaping styles.
What's in the Box
- 1 x Uwell Caliburn G3 Pro Koko device
- 1 x 0.4 Ohm Caliburn G3 pod
- 1 x 0.9 Ohm Caliburn G3 pod
- 1 x Lanyard
- 1 x USB-C cable
- 1 x User manual
