Which pods does the Allo Pava Horiz Pro use?

It uses 2ml Pava Horiz pods that fill from the front, and a 0.6 Ohm and a 0.8 Ohm pod come included. Each pod has a built-in coil, so you replace the whole pod once the coil fades. The 0.8 Ohm pod suits a tighter MTL draw, while the 0.6 Ohm pod gives a looser RDTL one. Both fit the same device.

How long does the battery last and how do I charge it?

The built-in 1000mAh battery lasts most vapers a full day between charges. Heavier use will shorten that, as you would expect. When it runs low, you recharge it over the included USB-C cable, and a full charge takes under an hour.

What is the difference between MTL and RDTL on this kit?

MTL means mouth to lung, a tight draw that feels like a cigarette, and the 0.8 Ohm pod suits it. RDTL, or restricted direct to lung, is a looser draw with a little more vapour, and the 0.6 Ohm pod handles it. You simply swap the pod and adjust the airflow to switch styles.

What e-liquid and nicotine strength should I use?

Allo recommends a 50/50 e-liquid for this kit, which works well with nicotine salts and freebase liquids. If you smoke around 10 a day, a 10mg or 12mg salt is a sensible start. Lighter smokers often prefer 5mg or 6mg, while heavier smokers may want up to 20mg. You can then step down as your cravings ease.

Is the Allo Pava Horiz Pro legal to buy in the UK?

Yes. The kit is a refillable device with a 2ml pod capacity, so it meets UK TPD rules. It is not a disposable, so you refill it with your own e-liquid and recharge it over USB-C. As a result, it costs less per week than single-use vapes while staying fully compliant.

Allo Pava Horiz Pro Pod Kit | 1000mAh Bluetooth Pod Kit

Product Summary

The Allo Pava Horiz Pro is a compact refillable pod kit with a 1000mAh battery, a 0.96 inch touchscreen and both MTL and RDTL vaping. It charges over USB-C in under an hour and adds a smart chipset with Bluetooth call alerts. Two Allo pods are included, a 0.6 Ohm and a 0.8 Ohm, so you just add 50/50 e-liquid and go. It suits new and everyday vapers who want a simple, smart pocket kit in three colours.

The Allo Pava Horiz Pro is a compact refillable pod kit that keeps everyday vaping simple and smart. It carries a built-in 1000mAh battery and a 0.96 inch HD touchscreen. So you can check every setting at a glance. As a result, it suits new and experienced vapers who want an easy pocket device.

The kit also ships with two Allo pods, a 0.6 Ohm and a 0.8 Ohm. So you can start as soon as you add your own e-liquid. Because the two pods differ in resistance, the kit covers both MTL and RDTL draws. Meanwhile, a smart chipset sets the wattage for you, while Bluetooth lets the screen show incoming calls. A USB-C cable is included too.

At a Glance

1000mAh built-in battery that lasts most vapers a full day
Full USB-C charge in under an hour
5W to 30W variable output
Inhale and button activation
Smart chipset that sets the wattage automatically
0.96 inch HD touchscreen with Bluetooth call alerts
Adjustable airflow for MTL and RDTL draws
2ml front-filling refillable pods, 0.6 and 0.8 Ohm included

Who is the Pava Horiz Pro for?

Choose it if:

You want a simple refillable pod kit with a screen and a long-lasting battery
You are moving on from disposables and want an easy mouth to lung draw
You like to fine-tune the feel with adjustable airflow and a smart mode

Look elsewhere if:

You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
You never want to refill or recharge, since this kit needs your own e-liquid and topping up

A Slim Body With a Smart Screen

The Pava Horiz Pro stays slim enough to sit easily in the hand. It measures 113 by 25 by 15mm and weighs just 63g. So it slips into a pocket or bag with ease. On top of that, a 0.96 inch HD touchscreen keeps every setting clear.

The range also spreads across three finishes, from warm to understated. In short, there is a colour for most tastes:

Brown Woodgrain for a warm, natural look
Gray Carbon for a darker, understated tone
Pearly White for a clean, bright finish

A Full Day of Power

The 1000mAh battery is generous for such a compact device. As a result, it comfortably covers a full day for most vapers. When it runs low, the included USB-C cable recharges it in under an hour.

The kit also keeps control simple. First, the smart chipset reads your pod and sets a suitable output. Then you can adjust the power yourself, from 5W up to 30W. Meanwhile, Bluetooth links the screen to your phone, so it shows incoming calls. You can also fire by inhaling or by pressing the button.

Allo Pods and Front Filling

First, fill the 2ml pod through the port on the front, then click it into place and vape. Because the pods fill from the front, topping up stays quick and clean. The included 0.8 Ohm pod suits a tighter MTL draw, while the 0.6 Ohm pod gives a looser RDTL vape. Both use a built-in coil, so you swap the whole pod when it fades.

We recommend pairing either pod with a 50/50 e-liquid. So the flavour stays smooth across both draws. Each pod runs best at its own resistance, shown in the table below.

Pava Horiz Pod Version & Resistance
2ml, 0.6 Ohm (Included)	Front Filling, Built-In Coil, RDTL, 50% VG
2ml, 0.8 Ohm (Included)	Front Filling, Built-In Coil, MTL, 50% VG

Adjustable Airflow for Every Draw

The Pava Horiz Pro gives you real control over the inhale. First, the airflow slider lets you tighten or open the draw. So you can set a snug MTL pull or a looser RDTL one. As a result, one small device suits several styles.

Because the airflow pairs with the pod you pick, the feel shifts to match. For example, the 0.8 Ohm pod with tighter airflow gives a classic cigarette-like draw. Meanwhile, the 0.6 Ohm pod with more air opens things up.