Innokin Coolfire P60 Pod Kit

The Innokin Coolfire P60 is a refillable sub ohm pod kit built for flexible, all-day vaping. It packs a large built-in 3200mAh battery and a 6W to 60W output range. So it suits vapers who want real power and long battery life from a compact pod device. You simply fill a pod, click it in and inhale to fire.

In the box you get two mesh pods, a 0.8 Ohm and a 0.4 Ohm. Because each pod has a built-in coil, you swap the whole pod when it fades. As a result, there are no separate coils to change. A USB-C cable is also included, so you can charge and add your own e-liquid straight away.

At a Glance

• Built-in 3200mAh battery for long, all-day sub ohm sessions
• 6W to 60W variable output
• MTL, RDTL and DTL vaping from one device
• Smart mode sets the wattage, or you dial it in yourself
• Inhale-activated firing
• Adjustable airflow slider on the pod
• Built-in screen to set and check your wattage
• 2ml top-filling refillable mesh pods, 0.4 and 0.8 Ohm included

Who is the Coolfire P60 for?

Choose it if:

• You want a refillable sub-ohm pod kit with a big battery for daily DTL vaping
• You are stepping up from a starter kit and want a versatile pod kit
• You like to switch between MTL and DTL and tune the draw with adjustable airflow

Look elsewhere if:

• You only want the tightest cigarette-like draw: a mouth to lung pod kit is a simpler choice
• You never want to refill or recharge: this kit needs your own e-liquid and topping up

A Versatile Pod in the Hand

The Coolfire P60 keeps a slim, rounded pod shape that sits easily in the hand. It measures 114 by 39 by 23mm and weighs 136g. So it stays fairly pocketable for a sub ohm kit. A textured side panel and a smooth finish also give it a smart, tactile feel.

On top of that, the range spans six finishes. These run from understated blacks to brighter pastels. In short, there is a colour for most tastes:

• Matte Black and Pearl White for a clean, classic look
• Blue Silver Gradient for a cool, two-tone accent
• Orange, Light Purple and Pale Pink for a brighter, softer finish

A Big Battery and Smart Power

The built-in 3200mAh battery is large for such a compact kit. As a result, it comfortably powers a day or more of vaping for most people. When it runs low, you recharge it over the included USB-C cable.

Control stays simple too. First, the smart chip reads your pod and picks a suitable wattage. Then you can fine-tune the power yourself across the 6W to 60W range. Meanwhile, the screen keeps your settings in view, so you just inhale to fire.

Refillable Mesh P60 Pods

Each Coolfire P60 pod holds 2ml and fills from the top. First, open the top-fill port, then top it up and close it again. Because every pod has a built-in mesh coil, you simply replace the whole pod when the coil fades, usually after about a week.

The kit includes two pods, a 0.8 Ohm and a 0.4 Ohm. Pair the 0.8 Ohm pod with a 50% VG e-liquid for a discreet MTL vape. The 0.4 Ohm pod instead suits DTL clouds, so match it with a 70% VG e-liquid. This kit also works with the wider range of P60 pods. Each pod runs best at its own wattage, shown in the table below.

Adjustable Airflow for Every Style

The Coolfire P60 gives you real control over the draw. First, slide the airflow control on the pod to tighten or open the inhale. So you can set a snug MTL draw or an airier DTL one.

Because the airflow is fully adjustable, one device covers several styles. For example, pair a tighter setting with the 0.8 Ohm pod for MTL. Then open the airflow and fit the 0.4 Ohm pod for RDTL and DTL clouds.

What's in the Box

• 1 x Innokin Coolfire P60 device
• 1 x 0.4 Ohm Coolfire P60 pod (2ml)
• 1 x 0.8 Ohm Coolfire P60 pod (2ml)
• 1 x USB-C cable
• 1 x User manual