Which pods fit the Hayati Quokka Elite?

The kit includes 0.6 and 0.8 Ohm Quokka pods, and it works across the wider Hayati Quokka pod range. Each pod fills from the side and uses a built-in mesh coil. When the coil fades, you simply fit a fresh pod rather than change a coil.

How long does the battery last and how do I charge it?

The built-in 1100mAh battery lasts most vapers a full day. You charge it with the included USB-C cable, and a full charge takes under 35 minutes. The colour-changing LED shows how much power is left.

What is the difference between MTL and RDTL on this kit?

MTL means mouth to lung, a tight draw that feels like a cigarette, and the 0.8 Ohm pod suits it. RDTL, or restricted direct to lung, is an airier draw for more vapour, which the 0.6 Ohm pod handles. You can also adjust the side airflow to fine-tune either draw.

What e-liquid and nicotine strength should I use?

Hayati recommends 50/50 e-liquid for this kit, which works well with nicotine salts and freebase liquids. If you smoke around 5 cigarettes a day, a 5mg salt or 3mg 50/50 is a gentle start. Around 6 to 14 a day suits 10mg salt or 6mg 50/50, while 15 or more a day often needs 20mg salt or 12mg 50/50.

Is the Hayati Quokka Elite legal to buy in the UK?

Yes. The kit is a refillable device with a 2ml pod capacity, so it meets UK TPD rules. It is not a disposable, so you refill it with your own e-liquid and reuse it. You must be 18 or over to buy it.

Hayati Quokka Elite Pod Kit | 1100mAh MTL & RDTL Kit

Product Summary

The Hayati Quokka Elite is a slim refillable pod kit with a 1100mAh battery, a colour-changing LED and both MTL and RDTL vaping. It charges in under 35 minutes over USB-C, and Quokka Mode reads each pod to set a suitable 12 to 22W output. Two side-filling Quokka pods are included, so you just add 50/50 e-liquid and go. It suits new and everyday vapers who want a simple, pocket-friendly kit.

The Hayati Quokka Elite is a slim refillable pod kit that keeps everyday vaping simple. It pairs a built-in 1100mAh battery with an aluminium alloy body and a colour-changing LED. So a quick glance tells you the battery level. As a result, it suits new and returning vapers who want an easy, pocket-sized device.

The kit also includes two Quokka pods, so you can start as soon as you add your own e-liquid. Because the two pods differ in resistance, the kit covers both MTL and RDTL draws. Meanwhile, Quokka Mode reads each pod and sets a suitable power. A USB-C cable is included too, so you can charge it straight away.

At a Glance

1100mAh built-in battery that lasts most vapers a full day
Full USB-C charge in under 35 minutes
12-22W power output
Inhale activation with Quokka Smart Mode
Colour-changing LED battery indicator
2ml side-filling refillable pods, 0.6 and 0.8 Ohm included
Built-in mesh coils for cleaner flavour
Adjustable airflow for MTL and RDTL draws

Who is the Quokka Elite for?

Choose it if:

You want a simple refillable pod kit that reads your pod and sets the power
You are moving on from disposables and want an easy mouth to lung draw
You like to fine-tune the feel with adjustable airflow

Look elsewhere if:

You are chasing big clouds: a sub-ohm kit suits direct to lung vaping better
You want an onboard screen and manual wattage control

A Slim Body That Glows

The Quokka Elite stays light and slim in the hand. Its aluminium alloy body measures 11.5 by 2.6 by 1.6cm and weighs just 55g. So it slips into a pocket or bag with ease. On top of that, a colour-changing LED shows your battery level at a glance.

The range also spreads across eight finishes, from understated to bright. In short, there is a shade for most tastes:

Onyx Black, Opal Grey and Silver White for a clean, classic look
Frost Green and Navy Blue for a deeper, natural tone
Baby Pink, Pink Blue Gradient and Quokka Color for a brighter accent

A Full Day, Then a Quick Refill

The 1100mAh battery is generous for such a slim device. As a result, it comfortably lasts most vapers a full day. When it runs low, the included USB-C cable tops it back up in under 35 minutes.

Charging stays simple too. First, the colour-changing LED signals how much power is left. Then Quokka Mode reads your pod and picks a suitable output between 12 and 22W. So you never have to set the wattage yourself.

Quokka Pods and Side Filling

First, fill the 2ml pod through its side port, then click it in and vape. Because the port sits on the side, you can top up without removing the pod. The included 0.8 Ohm pod suits MTL vaping, while the 0.6 Ohm pod handles a looser RDTL draw. Both use built-in mesh coils for cleaner flavour.

The kit also works across the wider Quokka pod range, so you can switch resistance as your taste changes. We recommend pairing it with 50/50 e-liquid. When a coil fades, simply fit a fresh replacement pod. Each pod runs best at its own setting, shown in the table below.

Quokka Pod Version & Resistance
0.6 Ohm Quokka Pod (Included)	Side-Filling, Built-In Mesh Coil, RDTL Draw
0.8 Ohm Quokka Pod (Included)	Side-Filling, Built-In Mesh Coil, MTL Draw

Adjustable Airflow for Every Draw

The Quokka Elite gives you real control over the inhale. First, the side airflow slider lets you tighten or open the draw. So you can set a snug MTL pull or a breezier RDTL one. As a result, one small kit suits several styles.

Because the airflow works with the pod you choose, the feel shifts to match. For example, the 0.8 Ohm pod with tighter airflow gives a classic cigarette-like draw. Meanwhile, the 0.6 Ohm pod with more air opens things up.